New profile posts

Is there a canadian contact? I have the ram box issue and a misaligned tailgate for which the dealer is stating thats the way they are and there is nothing they can do......not back for a 60000 dollar truck
What is the status on the "unicorn" software enhancement that is supposed to address CarPlay instability and the modem going to sleep after 15 minutes instead of staying online to receive messages for the design 7 days? VIN 1C6SRFJT9KN807740 4,000 miles. Starting to get real frustrated. Small thing really but Not a cheap truck either. I didn't buy it with the understanding that some things would work like crap.
What is the status on the "unicorn" software enhancement that is supposed to address CarPlay instability and the modem going to sleep after 15 minutes instead of staying online to receive messages for the design 7 days? VIN 1C6SRFJT9KN807740 4,000 miles. Starting to get real frustrated. Small thing really but Not a cheap truck either. I didn't buy it with the understanding that some things would work like crap.
Send me your VIN. I will see if I can get you a pin code. Only good for a short time. Use AlfaOBD for RF Hub reset and see if it works. Make sure your bcm has the passive entry added. Your used key will probably not program but the RF Hub reset should read the bcm and activate the passive entry in your RF Hub. Do this asap.
i have a rebel like yours how did you remove that back cover behind that grill.some one here on this site said its held on with little clips that can be remove by hand..any tips for my?...thanks
Lxvsocal
Lxvsocal
Yes it's just held by clips. No tools needed
  • Like
Reactions: ramButz
hey "Patsy"..brother.i have bought a "Litebar" im going to have it install to the bottom mesh grill.i have a rebel.so my is enclosed.one member here said his was that way and just remove the surrounding clips.but the back of my sensors will be expose!! o_O.would i have to get a special mesh grill.cant see why they had to make them different.....If it makes a difference:unsure:.
Also is there a winch you would recommend with your mounting system? Such as easiest install and wiring to the truck? The one you used in your demo looked nice. I don't have a winch I'm open to any model for ease of installation and operation. Thanks.
VICE design
VICE design
bang for buck I recommend the Smittybilt X20 Comp in either the 10,000 lb or 12,000 lb size. Most opt for the 12,000 lb version - it has a bit more power. General rule of thumb is 2.5 x vehicle weight. Of course with a snatch block you can get away with a smaller winch. This winch comes with a handy wireless controller that works nicely with this kit.
VICE design
VICE design
The VR 10s and 12s are also nice winches. They come prespooled with line, and the clutch actuator turns a little bit smoother when compared to the smitty. They have a waterproof and dust protection rating of IP67, while the smittybilt housing is rated more waterproof at IP68.
Do you know if your mount could be used in conjunction with the mounting brackets used for a Western Plow mount? Moving one from a 4th Gen 1500. Figured when I have the front end apart for mounting the plow I would do this upgrade at the same time.
VICE design
VICE design
The 2018 and 2019 frame are substancially different. I dont know how the new ones mount. Have a look on our website product page for the installation instructions and maybe you can see if they'll interfere from the picture
2019 Ram Rebel 12 Crew Cab - Black with Black Leather. Level 2 Package. Air Suspension. Sunroof. Bed Utility Group. Black Side Steps. Tri-Fold Tonneau Cover.
Just wondering how your liking that Roll-n-lock cover? I'm stuck between the Roll-N-Lock or the Mopar Tri-fold. This decision is driving me crazy.
Link for my youtube page. plenty of videos of oem/aftermarket parts installed on the 5th gen ram.
J
Jesse Merritt
2019 Ram 1500 release parking brake with a dead battery ??
Hello,
I would like to order a set in Delmonico Red please.

Is paypal okay ? Send me your info and I'll have funds to you asap.

Thanks,
Chuck
Hey there! Could you do me a huge favor and measure your front center cap to the bottom of the fender, and your rear center cap to the bottom of the fender? I am looking to put the mopar kit on my truck and am looking for some measurements.

Do you know if you have the "updated" kit with the larger front spacer?
Ramron
Ramron
I have the original 2” lift, but I had them do the addition of the spacer. I will try to get measurements.
A
Alxmlr789
Thanks ramron! At the time of your photos was the kit updated, or just the original kit?
Top