What's new
By:
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

When are they gonna start building new trucks?

2

2slow95vert

Active Member
Joined
Nov 2, 2018
Messages
62
Reaction score
40
Points
18
Age
47
I'm close to ordering a new Laramie. Anybody have a clue when the factory might reopen?
 
Nope. The people who work there don't even have a clue yet. Michigan is still in lockdown till the 28th, although they may slowly relax restrictions in the coming weeks. I wouldn't count on them opening the plant before then, and even when it does reopen it'll be far from full production for a while. Buying one already on a dealer's lot is your best bet unless you're willing to wait for a while.
 
There are also supplier questions. I was recently in for service and in need of a replacement trailer brake controller. They said the parts are on backorder until September.
 
W
Granite2WD said:
There are also supplier questions. I was recently in for service and in need of a replacement trailer brake controller. They said the parts are on backorder until September.
Click to expand...
Absolutely. That will likely end up being a bigger (and longer term) problem beyond just getting the assembly plants back open. There will be issues all the way down the supply chain.
 
I ordered a Limited on 4/27. I knew it might take a bit to get the factories back up and running. At the time of my order they were saying May 4th to resume, now that has moved to May 18th or maybe even the 28th. Knowing that the factories usually switch over in June, I really wonder at this point will there even be any more 2020’s produced this year or will they just go ahead and switch over for the 2021 MY. ”If” that were to happen, I would assume that those of us that submitted an order would have the right to receive a full refund or have the option to re-order a 2021. Thoughts?
 
Brianziggy64 said:
I ordered a Limited on 4/27. I knew it might take a bit to get the factories back up and running. At the time of my order they were saying May 4th to resume, now that has moved to May 18th or maybe even the 28th. Knowing that the factories usually switch over in June, I really wonder at this point will there even be any more 2020’s produced this year or will they just go ahead and switch over for the 2021 MY. ”If” that were to happen, I would assume that those of us that submitted an order would have the right to receive a full refund or have the option to re-order a 2021. Thoughts?
Click to expand...
I would think you’d either get the refund or be able to change the order for a 2021
 
Brianziggy64 said:
I ordered a Limited on 4/27. I knew it might take a bit to get the factories back up and running. At the time of my order they were saying May 4th to resume, now that has moved to May 18th or maybe even the 28th. Knowing that the factories usually switch over in June, I really wonder at this point will there even be any more 2020’s produced this year or will they just go ahead and switch over for the 2021 MY. ”If” that were to happen, I would assume that those of us that submitted an order would have the right to receive a full refund or have the option to re-order a 2021. Thoughts?
Click to expand...
My thought is that they will make no changes to the 2021, except maybe raise the MSRP. And then they will tell you that, since your order was in already, you can get a 2021 at the 2020 price. Isn't that great?
 
That would be an interesting option, however something tells me that their lawyers would say they would need to refund us our deposits or order a 2021. The paperwork says that agreed to sell a “2020” for X number of dollars Not a 2021.
 
I think they are planning to start 5/18. We will see if it happens. They backed off the 5/4 date at the end of April.
 
Seadweller23 said:
I think they are planning to start 5/18. We will see if it happens. They backed off the 5/4 date at the end of April.
Click to expand...
Doubt it'll be that soon. As I said, the people who work there haven't even been given any info yet. I know people in material handling/delivery at SHAP and they are saying probably June now. The Mexican government has extended their mandatory shutdown till May 30 now. All Hemis, some V6s/4 cylinders, and many, MANY other parts are sourced from Mexico. Can't build the trucks (or much of anything else) without those parts. Doesn't hurt to think positive though...
 
Last edited:
airgas1998 said:
may 18th per uaw….IF governor of Michigan grants it...
Click to expand...
She's a bottom feeder. She allowed people to go canoeing, sailing, kayaking, etc., but doesn't allow motor boats..... what a slimeball
 
Yep. Robocalls went out today to employees of US plants. 5/18 is the (very fuzzy) target for everyone except Belvedere. Mexico will still be a problem for everyone though regardless of when they technically 'open'.
 
I saw the May 18th restart date today too; big Q1 loss for FCA. I'm hopeful as I ordered a 2020 Limited on March 3rd. Got a nice email from Ram Brand on April 4th about the truck being built but would be delayed. I have a VIN so I guess they will build it at some point. I can wait it out (good idea about 2021 if it drags on much longer). I just hope that once they actually do restart that everyone, and I mean everyone, is excited and happy about getting back to work. Not too keen on a new truck where half the line is pissed off about safety, etc.
 
stronbl said:
I saw the May 18th restart date today too; big Q1 loss for FCA. I'm hopeful as I ordered a 2020 Limited on March 3rd. Got a nice email from Ram Brand on April 4th about the truck being built but would be delayed. I have a VIN so I guess they will build it at some point. I can wait it out (good idea about 2021 if it drags on much longer). I just hope that once they actually do restart that everyone, and I mean everyone, is excited and happy about getting back to work. Not too keen on a new truck where half the line is pissed off about safety, etc.
Click to expand...
yeah no ****tt...think that missing fender clip was an issue you just wait.....;)
 
stronbl said:
I saw the May 18th restart date today too; big Q1 loss for FCA. I'm hopeful as I ordered a 2020 Limited on March 3rd. Got a nice email from Ram Brand on April 4th about the truck being built but would be delayed. I have a VIN so I guess they will build it at some point. I can wait it out (good idea about 2021 if it drags on much longer). I just hope that once they actually do restart that everyone, and I mean everyone, is excited and happy about getting back to work. Not too keen on a new truck where half the line is pissed off about safety, etc.
Click to expand...
I’m in the same boat, I ordered my Laramie on 3/5! Went to D1 status on 3/12 , received a vin # with a approximate build date in the week the plant closed. Have not heard a thing since. From what I understand D1 means that all parts to build the truck are on sight and truck will be assigned a build date.
I feel the same way about the truck being one of the first down the line with new workers and ones that don’t want to be there during this! I just have a gut feeling until things are running for a couple of weeks there will be lots of mistakes on trucks! This will be my fourth Ram, second week be I have special ordered and I have never had one problem with any of them!
 
According to the Detroit News, they are shooting for the 18th of May. Of course the "Queen of Michigan" might have something to say about it......

At least my basement project is restarting tomorrow.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Site Vendors

https://www.jasonlewisautomotive.com/

Members online

Total: 831 (members: 10, guests: 821)
Back
Top