What's the best bed step functionality option?

[smashweights]

You won't regret it. Just ensure you have a ratcheting torque wrench and a shallow socket (i believe 15/16"). The only difficulty with the install is the space between the exhaust and the step is tight and you can only get about 1/4 turn or less. I tried to do it with a beam style torque wrench, which was nearly too wide to fit, and it took ages until my neighbor popped over to see what I was doing, offered me his cheap harbor freight ratcheting torque wrench and it was waaaay easier.

 

[jloops]

Wow, thanks guys!
Lots of replies, but one recommendation lol. I will go with Mopar step then!
Where can I get the best deal? BamWholesaleParts seems to be back ordered.

Local dealer might be the way to go with the 15% off coupon. Also compare to MoparAmerica they used to have good deals on them and always had them in stock.

 

[cj7]

I put in the bed step as well. If you want to have an assist with the tailgate down i think it is the best option. There is a 20% off any accessory coupon on the Ram website as well

Where might this 20% coupon be found?

 

[Kooch80]

Where might this 20% coupon be found?

Through the dealer website, specials section. It is for 15% not 20, i was incorrect before.

Mopar Parts & Service Coupons | West Hills Chrysler, Dodge, Jeep, Ram

Take advantage of the available Mopar parts and service coupons at West Hills Chrysler, Dodge, Jeep, Ram. Visit us today!

www.westhillscjd.com

 

[Sv250]

Keep checking ebay. I got mine for $280

 

[Bubba33]

You won't regret it. Just ensure you have a ratcheting torque wrench and a shallow socket (i believe 15/16"). The only difficulty with the install is the space between the exhaust and the step is tight and you can only get about 1/4 turn or less. I tried to do it with a beam style torque wrench, which was nearly too wide to fit, and it took ages until my neighbor popped over to see what I was doing, offered me his cheap harbor freight ratcheting torque wrench and it was waaaay easier.

I believe I used big have half in adjustable handle to tighten it with a extension. Didn't use a torque wrench. Just got it real tight.

 

[smashweights]

I believe I used big have half in adjustable handle to tighten it with a extension. Didn't use a torque wrench. Just got it real tight.

I'd probably check it with a torque wrench at least. Install recs 120ft-lbs and two of the bolts hold the trailer hitch.

 

[Bubba33]

I'd probably check it with a torque wrench at least. Install recs 120ft-lbs and two of the bolts hold the trailer hitch.

Its good my rachet is as long as my torque wrench ..

 

[Kelan]

Found it for 21% off = $263.55 + free shipping with code "FREESHIP" ...I'm about to order one myself.

82215289AG - Bed Step for Base Tailgate Vehicles | Athens Dodge, Athens GA

Features an articulating arm that lowers down for easy access to the truck bed and retracts back to stored position with a gentle push giving an ôout of the wayö look within the bumper. Load rated up to 350-lbs and works with the Mopar« Bed Assist Handle (sold separately - part 82215496).

www.moparpartssurplus.com

 

[mikeru82]

For anyone with aftermarket 5 inch exhaust tips, remove the driver side exhaust tip before attempting this installation. I wasn't able to install my step with the B2 Fabrication exhaust tip in place. Might have been able to force it, but I didn't want to scratch the tip up. I'd probably remove the stock one if I was installing this step again. It's easy enough to remove, and gives you a lot more room to work.

 

[TVANVA]

Found it for 21% off = $263.55 + free shipping with code "FREESHIP" ...I'm amount to order one myself.

82215289AG - Bed Step for Base Tailgate Vehicles | Athens Dodge, Athens GA

Features an articulating arm that lowers down for easy access to the truck bed and retracts back to stored position with a gentle push giving an ôout of the wayö look within the bumper. Load rated up to 350-lbs and works with the Mopar« Bed Assist Handle (sold separately - part 82215496).

www.moparpartssurplus.com

Thanks for the tip. Price and coupon was still valid, so ordered one for myself.

 

[Nibis]

I got mine installed yesterday, besides slipping off the lower nut and busting, and cutting my knuckle on the spare tire shield, it a pretty easy install, and, I love it !

 

[curh]

Anyone know why this part shows discontinued most places?

 

[Nibis]

I believe the changed to a newer style

 

[72soft-top]

Any idea what the new part number is?

 

[ecke555]

Any idea what the new part number is?

Part Number: 82215289AH