What's the best bed step functionality option?

[keanezheng]

I need to install something to make getting up to the tailgate an easier task.
My RAM doesn't have the factory deployable bed step, so apparently that's...
Option 1. That's also the most expensive one, because just the part costs around 300 including tax on eBay.
Option 2 would be this

HitchMate TruckStep X-Large Receiver Step 4037 - The Home Depot

Add a sturdy step to your truck with this HitchMate Truck Step. It's a 8 in. x 11 in. platform with a 500 lb. weight capacity so you can reach your cargo area. It mounts to 2 in. hitch receivers and it

www.homedepot.com

It's a long hitch step, it's around 150 bucks and installation is really easy compared to the OEM bed step. Downside I guess is, I will need to take it off if I need to use the hitch. It also seems it will rust and get stuck if I don't spray WD-40 regularly based on customers' feedback.
Option 3 is the cheapest

Amazon.com: Traxion 5-100 Tailgate Ladder: Automotive

Buy Traxion 5-100 Tailgate Ladder: Ladder Racks - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

Downside is I will have to drill holes on the tailgate and the ladder will make the tailgate un-sit-able lol. Ladder will also be not very good if I park on rugged/rocky/unflat ground.

What would you recommend? Thanks

 

[Sv250]

I have the mopar step and its worth it. Extremely well built. Uses your hitch bolts. Easy to deploy assisted retract.

When its up only a small black tab is visible.

 

[smashweights]

Deployable step takes about 15 minutes to install via 3 bolts. Yeah it's pricey, but my 3 year old can climb in and out of the bed unassisted with it and the tailgate down. Works great.

 

[PMantle]

I'd love to find out that a GM bumper would fit lol

 

[Ranger482]

I had Chevys in the past and the integrated bumper step was the best solution.

Short of that, get the Mopar step, it is a little pricey, but very well built, does not interfere with hitch access or operation and is virtually invisible when stowed. Best option out there.

 

[Kooch80]

I put in the bed step as well. If you want to have an assist with the tailgate down i think it is the best option. There is a 20% off any accessory coupon on the Ram website as well

 

[Bubba33]

Mopar bed step, everything else looks cheap. I installed mine in 15 minutes. I got mine for 275.00 .

 

[brian42]

Another vote for the Mopar bed step. Low profile when retracted and great position to step on/off the tailgate.

I didn't think much of it since it was on the truck when I bought it but but the more I use it the more I love it.

 

[Apexcars]

AMP research also makes one but it isn't much cheaper than the MOPAR one. https://www.amp-research.com/amp-research-75322-01a-bedstep-rear-bumper-access

 

[Apexcars]

The first step looks like it hangs down pretty low. I would be worried about hitting it on speed bumps and especially if you went off road any.

 

[brian42]

Bestop makes one too: https://www.bestop.com/dodge-ram/2019/ram-1500/trekstep/

IMO you won't find one with a lower retracted profile than OEM.

 

[Sv250]

 

[Sv250]

 

[Rick J]

I also have the MOPAR bed step. Here is a cheaper place to buy it if you decide to go with it.

82215289AH Rear Bumper Bed Step Black RAM 1500 DT 5th Gen (2019-2024) Mopar OEM | Auto Parts

Upgrade your RAM 1500 with the practical Bed Step, crafted from high-strength aluminum for durability and ease of use. With a 350 lb weight capacity and articulating design, it offers effortless bed access and convenient storage.

www.bamwholesaleparts.com

 

[moparleo51]

I also have the MOPAR bed step. Here is a cheaper place to buy it if you decide to go with it.

82215289AH Rear Bumper Bed Step Black RAM 1500 DT 5th Gen (2019-2024) Mopar OEM | Auto Parts

Upgrade your RAM 1500 with the practical Bed Step, crafted from high-strength aluminum for durability and ease of use. With a 350 lb weight capacity and articulating design, it offers effortless bed access and convenient storage.

www.bamwholesaleparts.com

Yeah I was going to purchase o e bit it doesnt ha e a place to put it I to a cart. It says call for availability. I noticed on a few other mopar parts sites it say to give them 7 to 10 weeks for delivery. Must be on back order.

Sent from my SM-G960U using Tapatalk

 

[DesertRebel]

Another vote for Mopar here. In the whole of things, the price is negligible.

Easy to install and use. Worth the cost.

 

[DesertRebel]

Yeah I was going to purchase o e bit it doesnt ha e a place to put it I to a cart. It says call for availability. I noticed on a few other mopar parts sites it say to give them 7 to 10 weeks for delivery. Must be on back order.

Sent from my SM-G960U using Tapatalk

There are a bunch of vendors - but I use this one frequently

Yeah I was going to purchase o e bit it doesnt ha e a place to put it I to a cart. It says call for availability. I noticed on a few other mopar parts sites it say to give them 7 to 10 weeks for delivery. Must be on back order.

Sent from my SM-G960U using Tapatalk

There are a bunch of vendors, but I use this one frequently https://www.moparwholesaleparts.com/?p=catalog&mode=search&search_in=all&search_str=Bed step

Inventory and price is usually pretty good.

 

[keanezheng]

Wow, thanks guys!
Lots of replies, but one recommendation lol. I will go with Mopar step then!
Where can I get the best deal? BamWholesaleParts seems to be back ordered.

 

[rebel without a cause]

You guys sold me, OEM is the way to go.
I'm picking one up right now.

 

[Bubba33]

Wow, thanks guys!
Lots of replies, but one recommendation lol. I will go with Mopar step then!
Where can I get the best deal? BamWholesaleParts seems to be back ordered.

Mopar has a 15 % off coupon. If you can find it at the dealer. I don't know about back order . I got mine in December at my dealer.