What did you do to your Ram today???

[SkittleRam]

Almost done de chroming it. Installed my new leather seats and center console slider

. View attachment 104866 View attachment 104867 View attachment 104868

Your seats came out nice!

 

[ferraiolo1]

Grabbed a rough country trifold, my old one lasted 6 years with no issues.

And got my mishimoto catch can, Amazon sent me one for a Honda Accord

Sent from my iPhone using Tapatalk

 

[Whoa_Ram]

Added the B2 tips to my truck. Not bashing on them, but some of the tip wasn’t painted all the way through and I thought these tips came with the B2 logo etched on them? Love how they look installed though

 

[brenan00]

I put the hellwig on the Big Blue Ewe today with the help of a co worker. I needed his torque wrench. Between my MR tools and his CT tools, we had what we needed and it took us twenty minutes. We had to do a little math since his wrench is in Newton meters not foot pounds. We work for a German company, so we live in Bar and Newton. A huge difference in handling, my wife drove it yesterday on the way to pick up some plate lunches, when we got there, she that’s enough you drive home. Let’s see what see thinks tonight. Also put in the car2link, and tazer. That’s it for my mods. Later

 

[Pep_594]

I received my OPT7 60" light bar today and I have the Curt 56584 wiring harness. To get the bullet connector for the white wire to the 5 pin harness do I cut up the harness that came with the light bar shown in the photo? Should I just cut up that black plastic and and get that bullet connector out of there?

No do not curt the black plastic harness. Buy a male bullet connector for Home Depot or Lowe’s and attach it to the white reverse wire on the light bar itself. Then plug the bullet connector into the black plastic harness. (Once you plug in the 4 pin harness from the light bar to the 5 pin curt harness, there will be one whole left over. Plug the white wire from the light bar into the left over hole.) I bought a #12 male bullet connector from Lowe’s. That was the largest they had in stock at the time. It was a little small so I pried open the ends to make it snuggly fit into the curt adapter harness. Then taped the entire harness together to be sure it wouldn’t come undone.

 

[CMil527]

Almost done de chroming it. Installed my new leather seats and center console slider

. View attachment 104866 View attachment 104867 View attachment 104868

Seats look great!

 

[Knight.]

No do not curt the black plastic harness. Buy a male bullet connector for Home Depot or Lowe’s and attach it to the white reverse wire on the light bar itself. Then plug the bullet connector into the black plastic harness. (Once you plug in the 4 pin harness from the light bar to the 5 pin curt harness, there will be one whole left over. Plug the white wire from the light bar into the left over hole.) I bought a #12 male bullet connector from Lowe’s. That was the largest they had in stock at the time. It was a little small so I pried open the ends to make it snuggly fit into the curt adapter harness. Then taped the entire harness together to be sure it wouldn’t come undone.

okay thanks, I’ll try it that way. I thought I read somewhere some cut up the harness to get that connector out lol. Your way makes more sense.

 

[Dogpatch]

Dows the AlfaODB work with the iPhone? It has an app for me to download but I still cant get the integrated trailer brakes to activate.

Sorry. No it doesn’t work with Apple products. Only Android.

 

[heliinstructor]

This weekend, I took the truck, my wife, and our dogs for a bit of backcountry glamping in North Georgia.

The solar setup is a work in progress, not really needed for this two night trip, and not particularly effective with the amount of trees around. But it was a worth experiment.

View attachment 104876
View attachment 104877

What make is that tent?

 

[Jasper5O]

Technically not my first cosmetic mod, but definitely the first one I've done myself. Just finished some vinyl stripes on the front and rear. It was the first time I've done something like this so it took way more time and frustration than I expected. I always loved this color combination since I seen a Dodge Viper ACR in billet silver with the red & black racing stripes. The Rosso Corsa (Ferrari) red vinyl doesn't match the powder coated glossy red tow hooks, but I love the satin color of the vinyl anyway. I'm still debating on applying it to the roof of the truck to finish it off, but I haven't made up my mind yet.

 

[CanRebel]

This is what I did today with my truck. I made it look ugly
I order black lugs, but I wanted see what little red would look like. caps are ugly, maybe real red lugs would look better.

 

[HemiDude]

Technically not my first cosmetic mod, but definitely the first one I've done myself. Just finished some vinyl stripes on the front and rear. It was the first time I've done something like this so it took way more time and frustration than I expected. I always loved this color combination since I seen a Dodge Viper ACR in billet silver with the red & black racing stripes. The Rosso Corsa (Ferrari) red vinyl doesn't match the powder coated glossy red tow hooks, but I love the satin color of the vinyl anyway. I'm still debating on applying it to the roof of the truck to finish it off, but I haven't made up my mind yet.
View attachment 104940 View attachment 104941

Wow- Looks great!

 

[HemiDude]

Not to it, but with it... Drove out to pick this up



Wife drove the truck back, passing me occasionally in a "spirited" way so I could hear the Ram's exhaust. Win-win for me !

 

[HemiDude]

Finally got my Leer topper and went camping. Having a covered bed for hauling gear and sleeping in is awesome.

Looks good, like those windows

 

[HemiDude]

Had the Cooper Discoverer AT3 4S tires installed today

Sent from my SM-G986W using Tapatalk

Looks good. I have the same tires, debated on white letters in or out. I think "out" lends a sporty look. Ended up installing mine "in" so as not to detract from the new wheels

 

[HemiDude]

Mounted my new setup

Vossen HF6-4 and Toyo AT3 305/45 r22


View attachment 104587
View attachment 104588


Sent from my iPhone using Tapatalk

Sharp!!

 

[jimothy]

What make is that tent?

It’s a Roofnest Falcon XL. The rack is from Front Runner, and it sits in the t-slots of a Retrax XR tonneau cover.

 

[CMil527]

Technically not my first cosmetic mod, but definitely the first one I've done myself. Just finished some vinyl stripes on the front and rear. It was the first time I've done something like this so it took way more time and frustration than I expected. I always loved this color combination since I seen a Dodge Viper ACR in billet silver with the red & black racing stripes. The Rosso Corsa (Ferrari) red vinyl doesn't match the powder coated glossy red tow hooks, but I love the satin color of the vinyl anyway. I'm still debating on applying it to the roof of the truck to finish it off, but I haven't made up my mind yet.
View attachment 104940 View attachment 104941

LOOKS GOOD!

 

[av8tor86]

Grabbed a rough country trifold, my old one lasted 6 years with no issues.

And got my mishimoto catch can, Amazon sent me one for a Honda Accord

Sent from my iPhone using Tapatalk

Grabbed a rough country trifold, my old one lasted 6 years with no issues.

And got my mishimoto catch can, Amazon sent me one for a Honda Accord

Sent from my iPhone using Tapatalk

Mike, I see you went the way of the Ram! I did to a year ago, don't think I'm going back to Chevy!!!

 

[LuvGun]

Technically not my first cosmetic mod, but definitely the first one I've done myself. Just finished some vinyl stripes on the front and rear. It was the first time I've done something like this so it took way more time and frustration than I expected. I always loved this color combination since I seen a Dodge Viper ACR in billet silver with the red & black racing stripes. The Rosso Corsa (Ferrari) red vinyl doesn't match the powder coated glossy red tow hooks, but I love the satin color of the vinyl anyway. I'm still debating on applying it to the roof of the truck to finish it off, but I haven't made up my mind yet.
View attachment 104940 View attachment 104941

Looks great, I would do the roof too