What did you do to your Ram today???

[turkeybird56]

Just installed my Hellwig Sway Bar that arrived in preparation for mt 4" BDS Lift Kit in 2 weeks! View attachment 64540 View attachment 64541

U got a part # for that sway bar? I sure would like to replace mine in MY 19 Bighorn...

 

[turkeybird56]

I did some light paint correction and Adams’s Graphene Ceramic Spray application. I might regret not putting the coating on vs. the spray but we’ll see. The spray went on Extremely easy and came off the same. I don’t believe this was any more difficult than detail spray.

I have used Turtle Wax Ceramic on my other car and my initial observation is Adams Graphene Ceramic didn’t streak as much and the shine is better.

I really liked that I could coat everything with the same spray. The reason I didn’t get the coating was to see how well the spray did on everything. If it all lasts a year or so I’ll do a full correction next year and use the coating (coating is supposed to last 7yrs vs. spray at 1.5 yrs.)

GREAT looking ride, Luv dat color......................

 

[the_GWB]

Finally got her done and cleaned up!! All work done by me and my brothers in the driveway. She's a little bigger than I expected, but I think she turned out pretty nice!

Zone Offroad 6" Suspension Lift
- Upgraded to Fox rear shocks
- Upgraded front springs to ORP springs so I didn't have to use the pre-load spacer
22 x 10 Dropstar Wheels with -25 offset
325/50/22 Fuel Gripper A/T tires (34.8" x 13.3")
Tyger Side Steps

 

[thrillracing]

Finally got her done and cleaned up!! All work done by me and my brothers in the driveway. She's a little bigger than I expected, but I think she turned out pretty nice!

Zone Offroad 6" Suspension Lift
- Upgraded to Fox rear shocks
- Upgraded front springs to ORP springs so I didn't have to use the pre-load spacer
22 x 10 Dropstar Wheels with -25 offset
325/50/22 Fuel Gripper A/T tires (34.8" x 13.3")
Tyger Side Steps

Great looking truck! Looks great with that lift and tire combo!


Hydro-Blue Laramie Lvl 2, Sport, Off-Road Group, Advanced Safety Group, Bed Utility Group, Pano, 3.92, E-Torque, Air-Suspension, Power Boards

 

[ThatThingGotaHemi]

-Put a black vinyl overlay on the RAM front grille letters to tone the chrome down a bit.
-Got one of those painted rear emblems from Retroshop.com
-Falken WP AT3w 305/65/18
-Fuel Covert D716 18x9

-Waiting on the bedcover. BAK REV X4.

Then I should stop doing things to it to save my marriage. lol.

 

[Kooch80]

what is your plan to install the bed cover? i noticed you have the MFT tailgate. i would like to get the same cover if it can be made to work

 

[NorthernArea51]

How was the process of removing the original emblem? I have a blackout one coming and have watched a few videos on the process Was curious if it was as cumbersome as the videos make it out to be

-Put a black vinyl overlay on the RAM front grille letters to tone the chrome down a bit.
-Got one of those painted rear emblems from Retroshop.com
-Falken WP AT3w 305/65/18
-Fuel Covert D716 18x9

-Waiting on the bedcover. BAK REV X4.

Then I should stop doing things to it to save my marriage. lol. View attachment 64606 View attachment 64607 View attachment 64608 View attachment 64610

 

[NorthernArea51]

Put rebel wheels onto my big horn. Swapped out the chrome hemi badge for an all black version. Have some matte black overlays for some of the chrome decals I still have to put on. And the bilstein 5100’s are on order.

 

[dsn112]

I did some light paint correction and Adams’s Graphene Ceramic Spray application. I might regret not putting the coating on vs. the spray but we’ll see. The spray went on Extremely easy and came off the same. I don’t believe this was any more difficult than detail spray.

I have used Turtle Wax Ceramic on my other car and my initial observation is Adams Graphene Ceramic didn’t streak as much and the shine is better.

I really liked that I could coat everything with the same spray. The reason I didn’t get the coating was to see how well the spray did on everything. If it all lasts a year or so I’ll do a full correction next year and use the coating (coating is supposed to last 7yrs vs. spray at 1.5 yrs.)

7 years, yea sure. Adams and their marketing team are becoming as full of **** as the rest of them. 7 years inside a garage not seeing daylight, maybe. The utter nonsense that comes out of these coating companies is absurd.


Sent from my iPhone using Tapatalk

 

[Kelan]

Tinted the front row windows.

 

[RamBlin19]

A lot of PPL laugh at me because I got a Full Tonneau Cover on truck, limits it. I tell em: Hey I got a perfectly good 14' by 7' stock trailer in garage I can pull and carry ne thing with, LOL. I know, not using truck to full potential, but it is pretty, LOL>..................................

BOIRD'S INANE sense of humor........................

I have a Lomax tri-fold cover, but had to take it off. Ow I may never take it off again!

 

[Psyonic64]

Took the truck in Friday for a brake squeak when hitting the brakes, and CarPlay not working. Got some parts on order now. View attachment 64128

Was the break squeal resolved? -
Mine's in now for the 2nd time to address it.

 

[turkeybird56]

I have a Lomax tri-fold cover, but had to take it off. Ow I may never take it off again!

WHICH is why I have my stock trailer in garage ready to take on any of the tasks if I need to ref hauling. A lot easier to load, secure, and I'll take the mpg hit just for ease of convenience, so in my case works for me.

 

[z0n3]

Was the break squeal resolved? -
Mine's in now for the 2nd time to address it.

Depends what issue you have, I have a front brake chirp, rear brake squeak, and had a rear brake howl in reverse.

 

[nivek1411]

Tinted the front windshield 35% ( already had 35% fronts and 5% rear) LOVE IT!!!
Also ordered my 3.5” RL SST, 35/12.5/22 Venom Power Hunter XTs and S&B CAI....
Wife isn’t too happy right now!


Sent from my iPhone using Tapatalk

 

[K_Hub]

Tinted the front windshield 35% ( already had 35% fronts and 5% rear) LOVE IT!!!
Also ordered my 3.5” RL SST, 35/12.5/22 Venom Power Hunter XTs and S&B CAI....
Wife isn’t too happy right now!


Sent from my iPhone using Tapatalk

Looks great! I know you don’t reside in the great state of Commifornia!


Sent from my iPhone using Tapatalk

 

[nivek1411]

Looks great! I know you don’t reside in the great state of Commifornia!


Sent from my iPhone using Tapatalk

Thanks and no, I love in Misery... aka Missouri


Sent from my iPhone using Tapatalk

 

[Wakesnowb]

I have a Lomax tri-fold cover, but had to take it off. Ow I may never take it off again!

You took the Lomax off and it hurt your bones? I have Lomax also and agree taking it on and off is easy but not easy lol

 

[Bwsteg]

Tinted the front windshield 35% ( already had 35% fronts and 5% rear) LOVE IT!!!
Also ordered my 3.5” RL SST, 35/12.5/22 Venom Power Hunter XTs and S&B CAI....
Wife isn’t too happy right now!


Sent from my iPhone using Tapatalk

Do aftermarket CAI void factory warranty? This is my first ram, I’ve never had issues with mods/warranty work with my other cars.

 

[Timeless]

Do aftermarket CAI void factory warranty? This is my first ram, I’ve never had issues with mods/warranty work with my other cars.

Technically warranties are not voided. Warranty claims can be denied if the aftermarket part is blamed for the work needed. Some dealers are better than others on this.

I always recommend getting to know the service manager and discussing it with them first at your favorite dealership. Most of the time you will find they do the same things to their trucks.