What did you do to your Ram today???

[TheTsieck]

Love the look, best bull bar on the market IMO.

Any way to relocate the front sensors to make them work with that bull bar?

If you really wanted to I guess you could drill new holes for them. I just turned them off but when they are on I get a wipe sensors message.

 

[TheTsieck]

Agreed. The site also says some trimming of the valence is required. I'm curious just how much that was. I'm assuming a small 3.5 inch notch where each bar comes down?

Sent from my SM-G955U using Tapatalk

didn't have to trim anything. mounted directly to the frame where the tow hooks would be. I do have a little bit of a gap from the bar to the lower valence but I'm ok with it it.

 

[TheTsieck]

That looks great, one of the best bull bar options I have seen. Can you add more pics (side views)?

I'll take some more pics of all sides today and post them later.

 

[User_18177]

I thought the first coin holder slot was for a half dollar coin or a Susan B. Anthony but nope. It’s for your wheel lock key.

Sent from my iPhone using Tapatalk

 

[rsmeanie]

I thought the first coin holder slot was for a half dollar coin or a Susan B. Anthony but nope. It’s for your wheel lock key.

Sent from my iPhone using Tapatalk

I prefer to keep mine hidden in my RamBin.

 

[RickWaz]

Added (4) amber (DRL ???) Light Bolts (https://www.amazon.com/gp/product/B01ADHUWWA/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1) to the grill. They were expensive BUT nice output and great warranty. They also come in (7) cool colors.

 

[User_18177]

I prefer to keep mine hidden in my RamBin.

Yeah I know I really can’t leave it there. Just found it interesting that it was a perfect fit.


Sent from my iPhone using Tapatalk

 

[PorBoy]

Went and placed an order for an oem exhaust which means my Mopar catback Will now be up for sale asap.

 

[MannymanX]

MannyHen,
How do those reverse lights work for you? I was thinking about something similar to that, buy I was worried the step would end up casting a shadow rendering the lights useless.

Hey Kevin.
Those are warning lights for when I stop on the side of the road to do my job. I explained it in this post:

What did you do to your Ram today???

Next phase of modification complete. I got all the bronze wrapped with 55% tinted gloss vinyl to bring the bronze brightness down some, and reduce the clash with the body color. I also had the RAM emblems on the doors removed and had them put black in the recessed limited lettering in the door...

5thgenrams.com

 

[ny2az]

Added (4) amber (DRL ???) Light Bolts (https://www.amazon.com/gp/product/B01ADHUWWA/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1) to the grill. They were expensive BUT nice output and great warranty. They also come in (7) cool colors.

any install info and wiring info ... thx

 

[jtread4]

Went and placed an order for an oem exhaust which means my Mopar catback Will now be up for sale asap.

Damn you have had a rough time finding an exhaust that pleases the whole family it seems. I’m looking at the Borla Touring and maybe the Mopar that you’re taking off.


Sent from my iPhone using Tapatalk

 

[PorBoy]

^^^. Lol I was good until I lifted it and then it became her focus.

 

[jtread4]

Fair enough haha. I have a wife and 5.5 month old baby to please so I’m trying to be sure I don’t get something obnoxious.


Sent from my iPhone using Tapatalk

 

[RickWaz]

I simply inserted the 11 mm Light Bolts into the slots of the grill. I could literally "screw" them in a few turns to make them tight. Wired them (piggybacked) to the existing wires for my RC 20" Hidden Bumper Light Bar.

BUT, because this light bar is the model w/ the Amber DRL feature, these Light Bolts do not illuminate when I'm using the amber DRL, as its supplied voltage is only 2 V. SO I've ordered the Logisys RM02 12V 15AMP Relay Kit w/ Remotes (https://www.amazon.com/gp/product/B00EQB8O7K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) to use instead. Then I can turn them on, regardless of what other lights are on.

 

[TheTsieck]

I simply inserted the 11 mm Light Bolts into the slots of the grill. I could literally "screw" them in a few turns to make them tight. Wired them (piggybacked) to the existing wires for my RC 20" Hidden Bumper Light Bar.

BUT, because this light bar is the model w/ the Amber DRL feature, these Light Bolts do not illuminate when I'm using the amber DRL, as its supplied voltage is only 2 V. SO I've ordered the Logisys RM02 12V 15AMP Relay Kit w/ Remotes (https://www.amazon.com/gp/product/B00EQB8O7K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) to use instead. Then I can turn them on, regardless of what other lights are on.

I have the same light bar, could you add a few pictures of the wiring? love the way they turned out.

 

[MannymanX]

Debadged the tailgate.
Added the awesome TazerDT.
Used the Lightshow feature a lot lol..
And also changed the splash screen to the Rebel theme... I've had it for over a week and it didn't change(compare to not having it which would change after a day)
I'm very happy with the purchase.

 

[TheTsieck]

Debadged the tailgate.
Added the awesome TazerDT.
Used the Lightshow feature a lot lol..
And also changed the splash screen to the Rebel theme... I've had it for over a week and it didn't change(compare to not having it which would change after a day)
I'm very happy with the purchase.

how did you change the splash screen? just upload via usb?

 

[MannymanX]

how did you change the splash screen? just upload via usb?

You have a few options pre-installed in the Tazer already.. I think you can upload a custom one also

 

[TheTsieck]

That looks great, one of the best bull bar options I have seen. Can you add more pics (side views)?

Hope these are helpful. Tried to show the gap as much as possible since it was mounted via toe hook spot instead of underneath

 

[Schnitz]

Did a quick custom light setting with the Diode Dynamics DRL boards:

Then swapped some ORP shocks out of the strut assemblies with B85100s:

Did you have to open up the headlights to do this?