What did you do to your Ram today???

[HSKR R/T]

This is why it


How did you do the taillight tint? Looks great

Guy on the 5th Gen Facebook group makes pre-cut film for them. Was $25 shipped for the taillights and mirrors. Installed myself.

 

[NorthernArea51]

You mean like the Destroyer Gray in the Built to Serve models?

Yep. Exactly. It would be nice to see that gray and other colors like it more widely available


Sent from my iPhone using Tapatalk

 

[19TXLimited]

The sequential lights require the white wire which is the white courtesy lights to have power in order for the sequential function to operate smoothly. See video attached with the door open when the white courtesy lights ( white wire ) have power to them.

When the door is closed and there is no power to the courtesy lights ( white wire ) the sequential lights don’t function properly. See video attached

I don’t want to drive with my white courtesy lights on all the time so I just live with the sequential not working properly


Sent from my iPhone using Tapatalk

Can you snap a picture of where you mounted the sequentials under the truck? I was thinking to mount on the pinch weld, but looks like you mounted closer to the side of the truck.

 

[z0n3]

Started collecting parts/pieces necessary to add passive entry to my truck. Looking forward to the install!

 

[Skater]

Started collecting parts/pieces necessary to add passive entry to my truck. Looking forward to the install!

Good luck. I've read the thread on that one.... it's a little more complicated than I would ever care to take on.

 

[RamVader]

Can you snap a picture of where you mounted the sequentials under the truck? I was thinking to mount on the pinch weld, but looks like you mounted closer to the side of the truck.

Here you go. Let me know if you need a picture from a different angle. The picture was taken with the step in/retracted

Sent from my iPhone using Tapatalk

 

[z0n3]

Good luck. I've read the thread on that one.... it's a little more complicated than I would ever care to take on.

Thanks, it’s certainly not a quick and easy mod a DIYer can do in a couple hours. It’ll be worth it in the long run, glad we have the members in this forum who pioneered it.

 

[RickWaz]

l feel the same way ... "LOVE MY 2020 LIMITED" .....

DITTO! My 2020 Limited is by far the best (and most expensive! ) vehicle I've ever owned!!! Even so, I've spent ~ $5,100 on various upgrades + accessories. BUT I'm almost done w/ my upgrades. Unless ...

 

[ThatThingGotaHemi]

Never have been a muflap fan....but offset 305 AT tires + retractable running boards that don't block anything + gravel roads to the trout river and boat ramp + an addiction to spinning tires = I need some mud flaps.. just wanting to protect the paint...not concerned about clearance angles... I'm not taking my stock suspension 153" wheelbase truck over any big obstacles anytime soon..

They wanted 2 grand to put that clear paint protector film on... LOL! I'm in the wrong business...

Decided on RokBlokz.. XL size.



I think they look good. Subtle but there..

a few pics.. normal mode.. no lift/level.

.

 

[5thGenRebel_AMK]

Never have been a muflap fan....but offset 305 AT tires + retractable running boards that don't block anything + gravel roads to the trout river and boat ramp + an addiction to spinning tires = I need some mud flaps.. just wanting to protect the paint...not concerned about clearance angles... I'm not taking my stock suspension 153" wheelbase truck over any big obstacles anytime soon..

They wanted 2 grand to put that clear paint protector film on... LOL! I'm in the wrong business...

Decided on RokBlokz.. XL size.

View attachment 65764

I think they look good. Subtle but there..

a few pics.. normal mode.. no lift/level.

.View attachment 65756View attachment 65763
View attachment 65757View attachment 65758View attachment 65760

bro... sick subie. sorry couldn't help myself these honestly look really good, i might get them for mine, never saw rokblokz on a truck before, just rally style cars. were they easy to install or was it a custom job? dig the wheels too!

 

[Duran]

Never have been a muflap fan....but offset 305 AT tires + retractable running boards that don't block anything + gravel roads to the trout river and boat ramp + an addiction to spinning tires = I need some mud flaps.. just wanting to protect the paint...not concerned about clearance angles... I'm not taking my stock suspension 153" wheelbase truck over any big obstacles anytime soon..

They wanted 2 grand to put that clear paint protector film on... LOL! I'm in the wrong business...

Decided on RokBlokz.. XL size.

View attachment 65764

I think they look good. Subtle but there..

a few pics.. normal mode.. no lift/level.

.View attachment 65756View attachment 65763
View attachment 65757View attachment 65758View attachment 65760

Any drilling required .

 

[ThatThingGotaHemi]

Lol.. I was fully aware of that. I was telling my buddy last night and I told him the only drawback was I bought them from a Subaru company...

I like how they are not a straight rectangle and have a rounded edge to block more debris. Also, how you can move them in or out for different tire sizes if you change setups ..before you tighten them down and it's not just one screw hole for one placement.

They had a pic on the website of a new body 1500 w/ them and looked good enough to try them out.

I did it.. so Kustom with a K...lol...Just takes the stock screws that are already on the truck holding the wheel liner in...I just used their wider washers in the kit.

 

[ThatThingGotaHemi]

Any drilling required .

no just a socket for the screws already on the truck..

 

[Duran]

Lol.. I was fully aware of that. I was telling my buddy last night and I told him the only drawback was I bought them from a Subaru company...

I like how they are not a straight rectangle and have a rounded edge to block more debris. Also, how you can move them in or out for different tire sizes if you change setups ..before you tighten them down and it's not just one screw hole for one placement.

They had a pic on the website of a new body 1500 w/ them and looked good enough to try them out.

I did it.. so Kustom with a K...lol...Just takes the stock screws that are already on the truck holding the wheel liner in...I just used their wider washers in the kit.

They remind me of rally armor i used on my dodge dart. Bit with those they came with plastic sit ins which i didnt like. Glad these use the oem sets. Ordering them now !!!!

 

[ThatThingGotaHemi]

One other thing...

RokBlokz put one roll of Smarties (the candy) inside the package that shipped as a thank you..good gesture.... but it was not in a package..just in the rolled up wrapper...

I love smarties...but ya know...could just be candy....could be something more fun from my youth... could be covid...

I threw them in the trash... lol

reminded me of an uber ride one night in college during halloween...got to my house and the guy offered me candy in a bucket...

I'm all up for free candy/food.. but sometimes it just doesn't seem right.. lol

you'll have to let us know what treat you get in your package

 

[RickWaz]

Yep, just put this one on my 2020 Laramie 2500 12" screen. $19.99 from Amazon. Went on easy and looks good. Just put it on tonight so we'll see if it helps with the fingerprints....but the important thing is scratch protection.

Amazon.com: Screen Protector Compatible with 2019-2021 Dodge Ram 1500 2500 3500 Uconnect 12 Inch Touch Screen,Flyingchan Anti Glare Scratch,Shock-resistant, Navigation Accessories

Amazon.com: Screen Protector Compatible with 2019-2021 Dodge Ram 1500 2500 3500 Uconnect 12 Inch Touch Screen,Flyingchan Anti Glare Scratch,Shock-resistant, Navigation Accessories

www.amazon.com

I've had this one for months, and even though it's not explosion-proof, it does exactly as advertised.

Amazon.com: KYKR Premium Screen Protector Compatible with 2019 2020 2021 1500 2500 3500 Uconnect 12 Inch Dodge Ram - Anti Glare Scratch Fingerprint Navigation Protection Tempered Glass

Amazon.com: KYKR Premium Screen Protector Compatible with 2019 2020 2021 1500 2500 3500 Uconnect 12 Inch Dodge Ram - Anti Glare Scratch Fingerprint Navigation Protection Tempered Glass

www.amazon.com

 

[ThatThingGotaHemi]

I've had this one for months, and even though it's not explosion-proof, it does exactly as advertised.

Amazon.com: KYKR Premium Screen Protector Compatible with 2019 2020 2021 1500 2500 3500 Uconnect 12 Inch Dodge Ram - Anti Glare Scratch Fingerprint Navigation Protection Tempered Glass

Amazon.com: KYKR Premium Screen Protector Compatible with 2019 2020 2021 1500 2500 3500 Uconnect 12 Inch Dodge Ram - Anti Glare Scratch Fingerprint Navigation Protection Tempered Glass

www.amazon.com

got the same one.. really cuts down on the fingerprints.

 

[Timeless]

Got the back windows tinted to match front windows along with a stripe along the front windshield.

 

[Ccm12]

I installed license plates today after a month of chasing down and getting all necessary signatures for a title. Never again will I buy an out of state vehicle that is still under lien from a private buyer.

 

[RickWaz]

Has anybody installed a security alarm/system? I'm not sure if these newer RAMs need them, but it sure seems like they would be good peace-of-mind additions.