What did you do to your Ram today???

[MannymanX]

New Ram member as of last night and what I did today? Well posting first time ever on Ram forum as I was long time Tundra owner, actually 2014 and 2016 Tundra trucks. Mixed emotions but I hope Ram will serve me another 5 years at least with much problems. Just to cover myself got 72 months or 84K warranty on most expensive things that could go as you all I'm sure aware what those things are.

Going to miss that RB20 running boards and bed cover from my Tundras
Also need lineX

Sent from my SM-G975U using Tapatalk

Forget about the tundra! RAM is way better! and stop being scared of unreliability non-sense! you bought a great truck!!! ENJOY IT

 

[jorgeanania]

Bought plugs from Amazon, painted metallic silver, and installed on bumper. Not perfect match to chrome but very close.
Easy peasy.

View attachment 45052View attachment 45053View attachment 45054

Have a link for the plugs?

 

[RebelWraith]

Did a quick custom light setting with the Diode Dynamics DRL boards:

Then swapped some ORP shocks out of the strut assemblies with B85100s:

 

[Neurobit]

Have a link for the plugs?

Here you go:

uxcell Hole Plugs Beige Plastic Snap in Locking Hole Tube(9.5-10.5mm) Steel Furniture Fencing Post Pipe Insert End Caps for Fitness Equipment 25 Pcs - - Amazon.com

uxcell Hole Plugs Beige Plastic Snap in Locking Hole Tube(9.5-10.5mm) Steel Furniture Fencing Post Pipe Insert End Caps for Fitness Equipment 25 Pcs - - Amazon.com

smile.amazon.com

 

[goDawgs65]

Tinted down getting ready for Ga heat. A mix of Coolvu and LLumar

 

[Rampat]

Did a quick custom light setting with the Diode Dynamics DRL boards:

Then swapped some ORP shocks out of the strut assemblies with B85100s:
View attachment 46554View attachment 46555

You got them with the ORP springs? Who did that for you?

 

[bigoldthor]

Installed my new Bakflip G2 tonneau cover. (Sorry, pic is not my truck, will take one this weekend and share if anyone is interested.)

 

[RebelWraith]

You got them with the ORP springs? Who did that for you?

There was a forum member selling a full set of ORP strut assemblies for cheap. Picked them up and some Bilsteins. Changed out the shocks today. Took about 30 minutes each.

 

[Trader]

Have a link for the plugs?

I used the following from amazon painting them the same color as my bumper, silver;
Morris 22384 Plastic Knockout Plug, 3/8-Inch, Black, 10-Pack

 

[Ram/Tun]

Tinted down getting ready for Ga heat. A mix of Coolvu and LLumar

Nice looking truck. Do you know what is rear factory tint? Also did you go at front with same tint?
Llumar front ceramic or standard?

Sent from my SM-G975U using Tapatalk

 

[goDawgs65]

Nice looking truck. Do you know what is rear factory tint? Also did you go at front with same tint?
Llumar front ceramic or standard?

Sent from my SM-G975U using Tapatalk

Rear is like a 20 cause the 35 LLumar still shows on driver and passenger... What little LLumar is ceramic. Front is like a 50. Thanks

 

[Rampat]

There was a forum member selling a full set of ORP strut assemblies for cheap. Picked them up and some Bilsteins. Changed out the shocks today. Took about 30 minutes each.

What tools did you need to do that?

 

[Ram/Tun]

Rear is like a 20 cause the 35 LLumar still shows on driver and passenger... What little LLumar is ceramic. Front is like a 50. Thanks

Thank you

Sent from my SM-G975U using Tapatalk

 

[Danny_TheHouseCook]

Bought her 7 months ago and she’s got 6k miles. Mid way through the dechroming process. I love this truck!

Nice wheels

 

[RebelWraith]

What tools did you need to do that?

Spring compressors
18mm pass through socket and wrench
8mm socket and 1/4" drive wrench
Dead-blow hammer
C-clip pliers
A vise to hold the strut assembly (not a necessity)

There may be something else. That's just off the top of my head.

 

[SColang22]

Can’t wait to install these tomorrow!

 

[Solosnavy]

Spring compressors
18mm pass through socket and wrench
8mm socket and 1/4" drive wrench
Dead-blow hammer
C-clip pliers
A vise to hold the strut assembly (not a necessity)

There may be something else. That's just off the top of my head.

you forgot the case of beer!

 

[PorBoy]

Not what I did but what I had. Several things for the Ram audio, will be putting them up for sale. Decided after all I’ve done to it, I’m just going to enjoy as is after it comes back from being lifted.

 

[NC Rebel]

Can’t wait to install these tomorrow!

Keep us posted on the install ! I ordered the Timber Grove airbags today .

 

[SColang22]

Keep us posted on the install ! I ordered the Timber Grove airbags today .

That’s what these are. Install looks super easy. If you need anything call Steve at Timber Grove. He’s awesome. Even did the two inch airbag extension to compensate for my lift