What did you do to your Ram today???

[ForTehNguyen]

just installed the bed step, straightforward and easy. Maybe 30 min taking my time

 

[Neurobit]

Just installed the B2 Magnaflow exhaust. Thread here:

Hi everyone, this is Matt from B2 Fabrication

Grats neurobit!! Let us know your thoughts Will def do that. I think earliest I can do this is on Sunday afternoon. Will post a review.

5thgenrams.com

 

[thrasherjosh]

Busy day today. Finished swapping out all the chrome badging with matte black badges. All were OEM replacements. However, I had to Plasti Dip the 1500 Hemi Emblems on the sport hood. I was happy that the matte black plasti dip matched the rest of the trim as well as it did.

Also Plasti Dipped the stock exhaust tips. 5 coats on that. We'll see how they hold up. I've heard mixed results.

Finally, installed the Mopar Deployable Bed Step. Wasn't difficult but took some time. Also don't have a torque wrench so between my son and I, got it as tight as we possibly could. I seriously doubt it's going anywhere. I think I know someone that has a torque wrench I can borrow and then I'll come back and tighten it up.

The only thing left that's chrome are the wheels. Still haven't committed to plasti dipping them, or just replacing the rims all together as I really don't like the style of them.

Tomorrow I am having my front windows tinted.

Truck really needs a wash and exterior detail now. How long should I wait after putting all these emblems on before washing it?

View attachment 30639 View attachment 30640 View attachment 30641 View attachment 30642 View attachment 30643 View attachment 30644 View attachment 30645 View attachment 30676

How hard was it to do the power steps! Was it plug and play? Did you have to pin any wires?


Sent from my iPhone using Tapatalk

 

[Cptcoolie]

Swapped Mopar soft tri-fold tonneau for Mopar hard tri-fold tonneau. Before and after photos attached.

 

[rrbhokies]

How hard was it to do the power steps! Was it plug and play? Did you have to pin any wires?


Sent from my iPhone using Tapatalk

Power running boards were installed at the factory. I installed the rear step bed.

 

[barakutha]

Solid Mopar licensed keychain off Amazon

Sent from my iPhone using Tapatalk

 

[NCSailing]

Big week for Black Beauty.
Ceramic tinting front windows and windshield
K&N Filter
Mud Flaps
Folding hard top
BedRug
Bed Step

Dealer, regrettably, has had to order new Ramboxes. I am the second in 3 weeks with disaster alignment problems and curling plastic up one side bad. Interestingly, the Ram initial truck survey asked a LOT of questions about Rambox concerns including alignment issues. So, they know there is a problem.

 

[MBORO19RAM]

Amp Steps, Truxedo LoPro, Mopar Katzkin Leather, Weathertech Mats, RBP Wheels, 35x12.50R20 Nitto Ridge Grapplers, 3.5" ReadyLift, Tinted tails, Tinted Third Brake Light, more to come.

 

[W13NY]

Do you mind sharing where you got that?

Yeah here you go - https://www.ebay.com/itm/Dodge-Ram-...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2648

 

[outdoorsmn660]

-Bed Rug Impact Installed
-Access Lorado Tonneau cover installed
-Bed Step Installed
-Trailer Brake controller installed
And Mopar slush mats put in instead of the carpet mats. Busy day!!

 

[StuartV]

Windows tinted. Ceramic film. 50% front. 30% on the rest.

And, ceramic coating on the paint.

I am really happy with how it came out.

I just need to get the Mopar power running boards and LED bed lighting put in and I think I’ll be done accessorizing.

 

[graniterebel21]

Please make an interior sound clip while cruising at highwayspeeds and full throttle

Interior sound wise you can't really hear it until you get on it. Cruising at highway speeds it's about as quite as stock. Going to be towing with it tomorrow and I don't really see it getting very loud, has a Corsa on my 2015 Ram and was pretty mellow until you really get on it.

 

[timtlu]

Windows tinted. Ceramic film. 50% front. 30% on the rest.

And, ceramic coating on the paint.

I am really happy with how it came out.

I just need to get the Mopar power running boards and LED bed lighting put in and I think I’ll be done accessorizing.

I have to say.. I'd never pay the kind of money it costs to do this.





But damn does it look good.

 

[Diamondback]

Swapped Mopar soft tri-fold tonneau for Mopar hard tri-fold tonneau. Before and after photos attached.

I've already talked to my Aftermarket team -- since I "THOUGHT" I was getting the Hard flip instead of the Soft flip.


other than that .. what else did I do to my rig today ??

WAITED for it to get here from its last check-in - ILLINOIS (Thurs AM) ...

*sigh*

 

[rrbhokies]

Busy day today. Finished swapping out all the chrome badging with matte black badges. All were OEM replacements. However, I had to Plasti Dip the 1500 Hemi Emblems on the sport hood. I was happy that the matte black plasti dip matched the rest of the trim as well as it did.

Also Plasti Dipped the stock exhaust tips. 5 coats on that. We'll see how they hold up. I've heard mixed results.

Finally, installed the Mopar Deployable Bed Step. Wasn't difficult but took some time. Also don't have a torque wrench so between my son and I, got it as tight as we possibly could. I seriously doubt it's going anywhere. I think I know someone that has a torque wrench I can borrow and then I'll come back and tighten it up.

The only thing left that's chrome are the wheels. Still haven't committed to plasti dipping them, or just replacing the rims all together as I really don't like the style of them.

Tomorrow I am having my front windows tinted.

Truck really needs a wash and exterior detail now. How long should I wait after putting all these emblems on before washing it?

View attachment 30639 View attachment 30640 View attachment 30641 View attachment 30642 View attachment 30643 View attachment 30644 View attachment 30645 View attachment 30676

After all the work I did to the truck yesterday, today and let someone else do the work. Had my front windows tinted 20% to match the rear windows. Also had a 5% Windshield band installed. It was their premium brand tint (not ceramic), has a lifetime warranty, and the price was reasonable ($115 for everything). Tomorrow it'll be finishing the install of my Husky Mud Flaps, and I may take a stab at plasti dipping the middle section of the rear tail lamp to match what the Rebels have. I hate looking at the solid Red block (although I like how it says RAM on it. If plasti dip doesn't work or look good, I may look into tinting it.

 

[retho78]

Installed the rear wheel well liners.
Pictures attached

 

[barakutha]

Windows tinted. Ceramic film. 50% front. 30% on the rest.

And, ceramic coating on the paint.

I am really happy with how it came out.

I just need to get the Mopar power running boards and LED bed lighting put in and I think I’ll be done accessorizing.

Looks sick!


Sent from my iPhone using Tapatalk

 

[tolh13]

Installed CalTrend sports tex seat covers

 

[Birdphoto19]

Installed CalTrend sports tex seat covers View attachment 30796 View attachment 30795 View attachment 30795 View attachment 30796 View attachment 30797

Would you have the part # for the rear seats? I have the hardest time finding a cover that allows the armrest to still function. Thank you in advance.

 

[tolh13]

Would you have the part # for the rear seats? I have the hardest time finding a cover that allows the armrest to still function. Thank you in advance.

CTA-CALTREND-GG-D - CALTREND-GG-D; DG390-03GG; SportsTex; Charcoal Insert with Black Trim; 2019 Ram 1500 Big Horn; Rear Row; 40/60 Split Bench; type of headrests: separate; armrests: yes​

1​

$170.77​

You can order different colors