What did you do to your Ram today???

[BeauxXL1200]

Installed the Mopar Chrome deflector today. Once its installed it looks good and it sits securely on the hood. A couple points about the install. It has 6 clips that are secured to the underside of the hood. 4 of them go into the holes where the scrivets are removed from the existing weather strip with the 2 most outer ones merely pushed onto the hood edge over top of the plastic tape. When you try to push the plastic screw plugs into the holes, they are so close to the edge of the metal clip you have to push them in at an angle and they tend to want to pop out. You are screwed if you lose one because they don't provide any extra hardware. If i were them i would toss in a few extra's. Its also key to align the deflector before putting the two outer clips on. All in all I'm pleased with it and would buy it again. Just be careful when you do it yourself!

Thanks for the write up, Silver64. I’ve ordered the matte black Mopar deflector for my Billet Silver. Post a pic of yours on the truck when you get a chance. I decided I like the lines and contour of the OEM deflector better than the after market deflectors.

 

[93CBRA]

Installed my Lomax tonneau cover, very impressed! Also Installed a brake controller, Carven exhaust, and Go Rhino step sides. Very pleased with everything, all great quality products!

 

[Rampat]

Had the Ram running boards installed. Not cheap, but this is the step I wanted....

Love that look. I just bought mine from my dealer for $420 and installing thin this week myself.

 

[chad202]

Lowered the rear 2", added 22x10(+25 offset) with 305/45 all season tires with 1/4". These wheels are like the 22" sport wheels but black instead of charcoal.

 

[Ortiz7983]

Had the Ram running boards installed. Not cheap, but this is the step I wanted....

Looks good. I’m going to go with the power steps. Hopefully real soon.

 

[chad202]

Pics

 

[YoAdrian]

Installed my Lomax tonneau cover, very impressed! Also Installed a brake controller, Carven exhaust, and Go Rhino step sides. Very pleased with everything, all great quality products!

Dang those are sleek looking steps. Which model are they?

 

[Creep0321]

Dang those are sleek looking steps. Which model are they?

Dominator D6

 

[ZombieSlayer]

Sooo I crashed it today Was pulling into a parking spot in a tight lot and this lady was going the wrong way down the aisle. No biggie I scoot over and wait for her to pass. As I was pulling into the spot the person in the previous spot pulls out without looking. I swing wide to avoid getting hit and swiped this poor lady's rear bumper.

3 photos of the damage to her car, 2 of the damage to the truck (one after cleaning the area with rubbing alcohol)

 

[Goatmann]

Thanks for the write up, Silver64. I’ve ordered the matte black Mopar deflector for my Billet Silver. Post a pic of yours on the truck when you get a chance. I decided I like the lines and contour of the OEM deflector better than the after market deflectors.

Mopar bug shield/wind deflector

Has anyone installed a front bug shield /wind deflector from Mopar part number 82215476? Do you have to drill or does it screw right in?

5thgenrams.com

If you want more info on the OEM deflector.

 

[NordicNevs]

Sooo I crashed it today Was pulling into a parking spot in a tight lot and this lady was going the wrong way down the aisle. No biggie I scoot over and wait for her to pass. As I was pulling into the spot the person in the previous spot pulls out without looking. I swing wide to avoid getting hit and swiped this poor lady's rear bumper.

3 photos of the damage to her car, 2 of the damage to the truck (one after cleaning the area with rubbing alcohol)

Oh damn. Looks like you could buff that out but still never fun. Glad it wasn’t serious.


Sent from my iPhone using Tapatalk

 

[Rampat]

Mopar bug shield/wind deflector

Has anyone installed a front bug shield /wind deflector from Mopar part number 82215476? Do you have to drill or does it screw right in?

5thgenrams.com

If you want more info on the OEM deflector.

How to you add Fuelly to your signature?

 

[My3rams]

PicsView attachment 22244View attachment 22245View attachment 22246

What tires did you buy make and model

 

[chad202]

What tires did you buy make and model

Falken 305/45/22 STZ05

 

[BeauxXL1200]

Mopar bug shield/wind deflector

Has anyone installed a front bug shield /wind deflector from Mopar part number 82215476? Do you have to drill or does it screw right in?

5thgenrams.com

If you want more info on the OEM deflector.

Thanks, Goatman. It looks great on your Patriot Blue.

 

[fotomatt1]

Inifinity Reference dash corner speakers are coming today!!


Sent from my iPhone using Tapatalk

 

[Peasey]

Magnaflow 18", part number #14264 welded in. Also, be sure to have the weep holes welded in the resonators, or it will sound terrible like an exhaust leak standing behind it. Sounds great now!

 

[Blvckr3bel]

Out my new wheels and tires on Saturday. They rubbed a little where the splash guard attaches but i cut out a small piece of the wheelwell liner. I'm leveling it next week.

 

[DR.CR]

Dominator D6

Where did you get the Dominator D6s from? They aren’t listed on Go Rhinos site or realtruck as an option for 2019 RAMs??

 

[RAMRaven19]

Well, received my Blackout Rear LED (lane assists) tail lights last Friday. Ready to install them and opened the packaging to find that they were damaged in transit. Currently working with the shipping company to submit my claim. Bummed because I was ready!!