One pair is 1" for the rear, the other is 3/4" for the front.What size? Looks like 1in. Let us know if you have to trim studs.
Sent from my iPhone using Tapatalk
Hopefully, I'll get them on this weekend.
One pair is 1" for the rear, the other is 3/4" for the front.What size? Looks like 1in. Let us know if you have to trim studs.
Sent from my iPhone using Tapatalk
The hot tubs never got used enough to warrant the work to take care of them. Personally, I don’t like sitting in hot soup.Get your hot tub set up for salt water as well
Just got a 22 with the HK, and I definitely like it. Still going to add subs, but not in as much of a rush as I thought id be to replace everything else.Just got my truck (19’ Limited) back from the Dealer Service to have the Driver Side Manifold Kit replacement done. 6 months ago they did the bolts on the passenger side. They do the Manifold, Gaskets and Bolts now instead of affected parts. Nice and quiet again…..for now.
Also…
Anyone who has a complaint about the Harmon Kardon sound quality and volume, should look at having the HK system software update done. There is a TSB on it I never knew about till now. The service bulletin is TSB 08-123-18.
I had it done at the same time as the manifold today and the resulting HK sound difference is phenomenal! More volume, more bottom end. BIG change.View attachment 149748
Perfect. My wife's an ex-city Asian...
One pair is 1" for the rear, the other is 3/4" for the front.
Hopefully, I'll get them on this weekend.
Thanks! That’s the goal, making it look custom without going too over the top to where it looks cheesyLooks amazing without looking out of place like a add on.
Sent from my iPhone using Tapatalk Pro
Haha so I was about to get some of that carbon fiber trim but I really wanted to do something I’ve never personally seen before!Now you have me thinking now I need to get rid of all the fake CF. Link to seller?
Sent from my iPhone using Tapatalk Pro
Haha so I was about to get some of that carbon fiber trim but I really wanted to do something I’ve never personally seen before!
Look up the seller Ichthus Graphics on Etsy. He has some topo vinyls on his page, but they won’t work for the interior because the print is physically too big. I messaged him and he was able to make me 18x18 sheets in whatever colors I wanted. One 18x18 sheet was enough to do all the trim if you don’t mess up. The back console trim was tricky until I realized it pops right off with a trim tool.
32", 20* grade driveway makes the tracks necessary24 28 or 32
Sure, I posted some of my experience in this thread. There is much more information throughout it.Can I ask about your front camera mod aux 1? What exactly is that - being able to switch it to stay on while driving, & are the details posted somewhere else?
Nice place. I like the colors and foliage.I haven’t seen a 32” Honda yet.
I used to spin going up as our driveway is pretty steep as well, not sure of the grade, but I can get away with chains on my snowblower.
View attachment 149769
Sure, I posted some of my experience in this thread. There is much more information throughout it.
Adding OEM Front Camera?
I forgot to mention, I had to cut the white wire on my front camera for correct picture orientation. Sent from my iPhone using Tapatalk5thgenrams.com
Having a '22, you enable the auxiliary cameras w/AlfaOBD or the like, then wire in an analog camera into one of the two (or both if you want two cameras) aux locations on the back of the Uconnect's module.
The aux camera's display is governed with the same logic as the reverse camera, meaning they don't stay on full-time unless you're below the low-speed threshold.
I installed it to have visibility in front when parking or whenever I want.
Yessir!This the one?Ichthus Graphics - Better graphics, better prices
The best graphics you can find online. Our products are made with 3m vinyl.ichthusgraphics.com