5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

Test fit some black Mcgard lug nuts to see how I like them. I think I do, so I’ll be buying a full set with locking lugs.

Also installed an MBRP cut and clamp muffler. Sounds good, wasn’t too hard, though I have a slight exhaust leak where the clamp tightens down. I may see about getting a wider clamp, worst case I’ll just have some shop weld it.

FF24F4C2-A94E-4071-993F-415BF19DE7D8.jpeg2F50976A-90F6-4489-BDBA-EB1347106342.jpegCCD89C54-C993-4E4A-B3E8-1E8A164E3AA6.jpeg

Exhaust
 
Last edited:
Yesterday actually
Go Rhino RB 20's installed
Opt 7 tailgate bar installed
Truxedo Sentry bed cover installed
Forgot to take pic of light bar.
Today was Airdesignusa.com spoiler
 

Attachments

  • A0016536-D52C-4AC1-9963-62E78F73F64B.jpeg
    A0016536-D52C-4AC1-9963-62E78F73F64B.jpeg
    265.2 KB · Views: 143
  • EDFC9941-350B-4B0F-BA9E-771F2422F20F.jpeg
    EDFC9941-350B-4B0F-BA9E-771F2422F20F.jpeg
    247.3 KB · Views: 128
  • 5CEC9C77-CCFC-4A63-B320-0EFB1F182890.jpeg
    5CEC9C77-CCFC-4A63-B320-0EFB1F182890.jpeg
    243.2 KB · Views: 132
  • 6B5F7E5B-7309-42C8-BB28-19444E3B8785.jpeg
    6B5F7E5B-7309-42C8-BB28-19444E3B8785.jpeg
    120.4 KB · Views: 138
  • 80B82339-273E-45E9-952B-6F17EF216664.jpeg
    80B82339-273E-45E9-952B-6F17EF216664.jpeg
    115 KB · Views: 142
  • 81E99511-5C9E-42F5-83D8-8B835B84B162.jpeg
    81E99511-5C9E-42F5-83D8-8B835B84B162.jpeg
    117.7 KB · Views: 145
Test fit some black Mcgard lug nuts to see how I like them. I think I do, so I’ll be buying a full set with locking lugs.

Also installed an MBRP cut and clamp muffler. Sounds good, wasn’t too hard, though I have a slight exhaust leak where the clamp tightens down. I may see about getting a wider clamp, worst case I’ll just have some shop weld it.

View attachment 123783View attachment 123784View attachment 123785

Exhaust
MBRP sounds great. I have one. too.
 

Attachments

  • MBRP c.jpg
    MBRP c.jpg
    122.1 KB · Views: 53
Test fit some black Mcgard lug nuts to see how I like them. I think I do, so I’ll be buying a full set with locking lugs.

Also installed an MBRP cut and clamp muffler. Sounds good, wasn’t too hard, though I have a slight exhaust leak where the clamp tightens down. I may see about getting a wider clamp, worst case I’ll just have some shop weld it.

View attachment 123783View attachment 123784View attachment 123785

Exhaust
Love my MBRP cut and clamp. Mine leaked at first, but I really ugga dugga'd it down and it sealed up. Or, throw some high temp RTV in there.
 
Yesterday actually
Go Rhino RB 20's installed
Opt 7 tailgate bar installed
Truxedo Sentry bed cover installed
Forgot to take pic of light bar.
Today was Airdesignusa.com spoiler

I've been debating on adding the spoiler, mainly because I hate putting fingerprints when closing the tailgate and this would provide a good grip. I hadn't seen it on a Rebel and I kinda like it.

Do you have any other pics? Like a further one from the side?
 
I've been debating on adding the spoiler, mainly because I hate putting fingerprints when closing the tailgate and this would provide a good grip. I hadn't seen it on a Rebel and I kinda like it.

Do you have any other pics? Like a further one from the side?
A microfibre cloth in your back pocket to wipe the fingerprints would be cheaper than the spoiler….just sayin. LOL 😎
 
Just hit 20K towards the end of our 2,900 mile road trip for spring break! Took the family from San Antonio, to White Sands National Park, Tucson, Flagstaff, the Grand Canyon, Sedona, and then back to Texas...it was a blast!! Only "issue" we had was that gas prices were at their peak during the trip. :cautious:

20220318_175947.jpg
(sorry for the bad photo...wife took the pic).

As usual, the truck ran like a champ and the family had no complaints. Enjoy some random photos from the trip... 😁

20220313_092505-1.jpg

20220315_082736.jpg

20220313_140133.jpg

20220315_113909.jpg

20220316_142159.jpg

20220316_173855.jpg

20220314_100027-1.jpg
 
I've been debating on adding the spoiler, mainly because I hate putting fingerprints when closing the tailgate and this would provide a good grip. I hadn't seen it on a Rebel and I kinda like it.

Do you have any other pics? Like a further one from the side?
I will add some more pics later. Normally I would like something like this but it its done just right. Have a buddy help you once that tape grabs hold you arent going to able to adjust it. It is very sturdy to close the gate with it.
 
Thanks to the people at @Accessory.Parts for the great deal and fast shipping. Also got the dezee rubber mat.

I suggest anyone shopping for parts give these guys a chance. Pleasent and easy to work with.
 
Just hit 20K towards the end of our 2,900 mile road trip for spring break! Took the family from San Antonio, to White Sands National Park, Tucson, Flagstaff, the Grand Canyon, Sedona, and then back to Texas...it was a blast!! Only "issue" we had was that gas prices were at their peak during the trip. :cautious:

View attachment 123833
(sorry for the bad photo...wife took the pic).

As usual, the truck ran like a champ and the family had no complaints. Enjoy some random photos from the trip... 😁

View attachment 123834

View attachment 123837

View attachment 123836

View attachment 123838

View attachment 123839

View attachment 123840

View attachment 123841
I have a 33' TT that I pull with my 1500 Ecodiesel. We went to Colorado during Thanksgiving. I averaged 11 MPG. I can only imagine what it will cost me the next big road trip we take.
 
Two coats of Avalon king applied. Now to sit and cure in the garage till cars and coffee Saturday

3ffc8021189f5296891cd24ac6691732.jpg

305af5ee512f3019cb7d3d97f724108b.jpg

97eaf56bf55d30dc9a92b612ce8c7b6a.jpg



Sent from my iPhone using Tapatalk
 

Users who are viewing this thread

Back
Top