Tire Rotation & TPMS

[AndreiV]

Today rotated my tires for the first time after 7,660 miles. OEM 275/55R20 Bridgestone Dueler (11/32 tread). Front were 10.5/32 and rear were 9/32, all even wear. After rotation re-aired front to 40 psi and rear to 36psi. Drove around and noticed that TPMS reading in reverse now, still tied to tires location before rotation. Will TPMS re-learn tire location on it's own, or I have to reset it, or leave it as is??

I used my spare tire for rotation, also re-aired it, and broke junk top tab on the spare access point trim. GORILLA tapped it.

 

[Patsy1099]

They will relearn automatically

 

[Raydar]

They will relearn automatically

Good info. I was about to ask the identical question. Thanks!

 

[Goatmann]

there should be an arrow pointing up on the spare tire access trim piece.
i dropped my spare to check air pressure this past weekend and used a trim tool to pop the piece up, then saw that tab.

 

[AndreiV]

there should be an arrow pointing up on the spare tire access trim piece.
i dropped my spare to check air pressure this past weekend and used a trim tool to pop the piece up, then saw that tab.

Unfortunately mine was half brok

there should be an arrow pointing up on the spare tire access trim piece.
i dropped my spare to check air pressure this past weekend and used a trim tool to pop the piece up, then saw that tab.

Yep. Mine was half broken, popping up, from the get go. Finally broke off. Not a big deal.