Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
That is a change in the BCM that doesn't need the TazerDT to be installed. If TazerDT is not in the truck, and you followed the unmarry process before removing , then it's unmarried.
Try the TazerDT on another truck
Any changes made to BCM will stay. Like if you changed DRL location, added trailer brake controller, changed tire sizes.......
When the tazer is unmarried, any changes that you used that tazer to make to the BCM (tazer vehicle settings) will go back to the way they were without the tazer.
Unmarried and two sleep cycles and your good. The Nav in motion is a live function. I use it unmarried and live settings Pin Lock,amber DRL's and other stuff
The “Nav In Motion” feature is a feature that can only be used while the tazer is plugged in. It is not a setting that the tazer can change on the vehicle, because it is not a configurable setting in the BCM. The tazer has to constantly “trick” the truck into being able to do the nav in motion, hence the reason it is a live setting and needs to be plugged in, there’s just no other way for this to happen.
I've never fully understood the whole turn cam thing. Maybe if you have 360 cameras, but why would I need the back up camera coming on to make a left or right hand turn?
I have the 360
