805myth1
Active Member
Didn’t get the nickel type but I did use these. I usually go a bit overkill when it comes to my audio setup.
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Subwoofer upgrade results?
- Thread starter Decuchi23
- Start date
Didn’t get the nickel type but I did use these. I usually go a bit overkill when it comes to my audio setup.
1791
Ram Guru
- Joined
- Nov 9, 2023
- Messages
- 594
- Reaction score
- 485
- Points
- 63
- Age
- 54
i hear ya ! i think i can hear it in here NC LOL. so nice work on the doors and under hood don't let me catch you using wood screws through the floor again
i also went with cdt's but in my stock dash locations Unity 7.5 and ES-02EX.
i have a set of cdt euro 6.75's i tried in the doors but ended up going with a 6x9 mid woofer
805myth1
Active Member
Lol but yeah glad I ditched the ds18’s and went with all cdt. I had the truck setup with a 2 way front stage before but after selling my project civic, I decided to go full active 3 way. Now just need to build a new ported enclosure for the new Pioneer subwoofer.
1791
Ram Guru
- Joined
- Nov 9, 2023
- Messages
- 594
- Reaction score
- 485
- Points
- 63
- Age
- 54
i had a few civics in my day did b-series swap's, 5 crx's,. after it's all said and done the only mod i have been able to keep from car to car to truck is my amp's and most the audio mods so that is normally my focus. if you got the cash i would scoop this up it's a DEAL!!
I had a 8.4 non nav now i have a 12in and i can confirm the 12 in not only looks the part it also has much better signal for processors
805myth1
Active Member
Yeah I was going to make the hatch into a boombox, was planning to run about 5K+ watts but I didn’t have time or energy to fully invest into it so I ditched it. Yeah I saw that 12” screen for sale but with the Hertz S8 dsp controlling the sound, I’m good with the 8.4.
1791
Ram Guru
- Joined
- Nov 9, 2023
- Messages
- 594
- Reaction score
- 485
- Points
- 63
- Age
- 54
yeah i have a rockford DSR-1 DSP. with the 12 the input don't distort at high volume like the 8.4. but if your good with it then great.
Last edited:
805myth1
Active Member
I had the dsr1 previously but like you mentioned the sound would get some distortion and I could not get rid of it. I switched to the iDatalink Maestro AR2 which allows you to use any dsp you want, instead of settling for the dsr1. Plus it uses the same t harness that I used for the dsr1 so it was still plug and play.
