Sub install

[shenana]

I know I'm kind of late, but does bypassing the ANC module cancel the vehicles ANC system? or does the ANC still work ?

 

[All_Black_Lone_Star]

it will cancel it out

 

[Quint]

I can't say that I noticed any difference not having the ANC active, but I notice having my sub!

 

[cablejack]

I have the same set up and just installed the subwoofer harness with ANC bypass from Net Audio and was able to add subs with no issues.

Dodge Ram Subwoofer Install Subwoofer Harness Converter

dodge ram radio t-harness, dodge ram radio harness, dodge ram harness, dodge ram radio t-harness, dodge ram radio harness, dodge ram harness

netaudio.com

Is this for the sub only or is for adding an AMP too?

 

[Ryon_Honea]

I know im really really late, i was wondering if someone could help me with a list of everything i need. I dont know how to work on a truck but i have friends lol. I just need help with a list of **** i need so i can buy everything. I never bought subs before im new at all this. I have a 2021 dodge ram 1500 big horn level 2 package. if anyone can reach out that would be awesome. [email protected] or 810-394-9989 thank you !!!

 

[PALM SPRINGS RAM MAN]

Hi guys… where or what color wire did you tap for power? Or did everyone run to the battery?

 

[djevox]

Hi guys… where or what color wire did you tap for power? Or did everyone run to the battery?

Power for what exactly? If it’s an amp, then yes, the battery or the post on the engine bay fuse block that the battery cable terminates at.

 

[Quint]

Yup, run a dedicated wire that is made for amps. My amp is mounted under the drivers seat with the wire running under the plastic sill plate. It then goes through the firewall directly to the battery (with an inline fuse).

 

[souva108]

BTW - what is the 4-pin port on the ride side of the ANC?

View attachment 85767

closeup
View attachment 85768

That is a diagnostic port used by the manufacture to get device info or change settings.

 

[Quint]

That is a diagnostic port used by the manufacture to get device info or change settings.

Thanks, I appreciate the response.

 

[ramButz]

Yup, run a dedicated wire that is made for amps. My amp is mounted under the drivers seat with the wire running under the plastic sill plate. It then goes through the firewall directly to the battery (with an inline fuse).

 

[TechGoku]

I have the same set up and just installed the subwoofer harness with ANC bypass from Net Audio and was able to add subs with no issues.

Dodge Ram Subwoofer Install Subwoofer Harness Converter

dodge ram radio t-harness, dodge ram radio harness, dodge ram harness, dodge ram radio t-harness, dodge ram radio harness, dodge ram harness

netaudio.com

I am installing a sub and planning to use the high level inputs. what wire did you tap off of? did you use a single speaker signal wire to left and right on the amp?

 

[Mcdevo76]

I am installing a sub and planning to use the high level inputs. what wire did you tap off of? did you use a single speaker signal wire to left and right on the amp?

I’m assuming you are buying the bypass. If so, you could cut the speaker wires running to the PAC and use those for high level input. I ended up disconnecting the PAC all together and running all of the speaker wires from the harness to an LC7i. From that point I ran one amp for subs and another for 6x9’s. If you are looking to tap factory wires without bypass I believe…

Grey/Black = Right -
Grey = Right +
White/Black = Left -
White = Left +