Burntramflakes
Member
- Joined
- Apr 28, 2020
- Messages
- 14
- Reaction score
- 3
- Points
- 3
- Age
- 35
Sorry if this is the wrong forum but it seemed appropriate. I’m getting a rubbing noise and vibration that I can feel in the wheel and on the floor when turning the wheel at low speeds (5-10 mph). It usually happens when turning onto a street or into a driveway. I’ve looked at some posts from the past but there hasn’t been a clear cut answer. I took it to the dealership 3 times. Twice asked them to take a look at the suspension to make sure everything looks good, 3rd time I told them about the issue but they can’t replicate the problem. I took a quick peek and instantly noticed some rub marks on both sides.
I showed these to the technician and he said these are the bump stops and that it’s normal for them to rub. This looks like it would only hit on full lock but the rubbing happens while not even turning the wheel a full 360 degrees so I don’t know. I’m trying to fix the issue before I put on billsteins and a new wheel/tire combo because I don’t want them to blame it on that.
Sent from my iPhone using Tapatalk


I showed these to the technician and he said these are the bump stops and that it’s normal for them to rub. This looks like it would only hit on full lock but the rubbing happens while not even turning the wheel a full 360 degrees so I don’t know. I’m trying to fix the issue before I put on billsteins and a new wheel/tire combo because I don’t want them to blame it on that.
Sent from my iPhone using Tapatalk