Tire fill alert does not need the engine running to work. The ignition must be in the RUN mode, with the transmission in park.
Only one tire can be filled at a time when using the Tire Fill Alert system.
The Tire Fill Alert Feature cannot be entered if an existing TPM system fault is set to “active“ or if the system is in deactivation mode. The system will be activated when there is over 1.5 psi of change in tire pressure .
The hazard lamps will come on to confirm the vehicle is in Tire Fill Alert. When Tire Fill Alert Mode is entered, the tire pressure display screen will be shown in the instrument cluster.
Operation:
The horn will chirp to let the user know when to stop filling the tire, when it reaches recommended pressure.
Tire Fill Alert will only work with the recommended tire pressure posted on the placard found inside the driver side door frame.
The horn will chirp three times if the tire is over filled and will continue to chirp every five seconds if the user continues to inflate the tire.
The horn will chirp once again when enough air is let out to reach the proper inflation level. The horn will also chirp three times if the tire is then under-inflated, and will continue to chirp every five seconds if the user continues to deflate the tire.
Tire Fill Alert will only work with the recommended tire pressure posted on the placard found inside the driver side door frame.