Gentlemen: Just wanted to post some pics of my Rough Country Grill Lights and Hidden Bumper Light Install. I did the light install but took it to my Local Shop to do the wiring, mostly because I could not find switches that I liked and thought would look good in the dash. I am more then happy with the outcome
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Rough Country Grill Lights and Hidden bumper Light
- Thread starter CharlieP
- Start date
PorBoy
Spends too much time on here
I have the grill led lights but I went Bluetooth on them as tonot have any switches visible.
Billy James
Ram Guru
- Joined
- Sep 13, 2018
- Messages
- 1,066
- Reaction score
- 807
- Points
- 113
- Age
- 55
- Location
- Jacksonville, Florida
I really like those Grill Lights. Is it possible to install them without removing the grill?
PorBoy
Spends too much time on here
That would be a no sadly..
Billy: Sorry Buddy the grill has to come out. I took my time on a very hot day and was very picky cutting the hole for the light and it took me 8 hours. Not too bad for an Old Guy.
brawler1588
Well-Known Member
- Joined
- Aug 28, 2019
- Messages
- 217
- Reaction score
- 164
- Points
- 43
- Age
- 36
Looks good, what local shop did the wiring?
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
Shop was No Limit 6503 Belair RD. Baltimore 21206 Talk to Mike
Captain Stack
Active Member
- Joined
- Jan 22, 2019
- Messages
- 90
- Reaction score
- 139
- Points
- 33
- Age
- 55
I don't see the RAM lights on the RoughCountry.com website, only the wired LED grill lights. Where did you get the bluetooth RAM light?
PorBoy
Spends too much time on here
That part I had custom made from a company located in Las Vegas. 
HockeyCowboy
Active Member
Installing mine now, the 6" grill lights. But noticed that when I am trying to take off the front / side bumper under the headlights that after I remove the 4 screws and then unsnap the fender flare / cover, the front bumper under headlights has a bolt in the wheel well. Was a little concerned about taking it out and getting it back in there. It was not in the instructions. Was curious if you guys had same issue or if something unique on mine. Did not see anyone talk about that bolt. Thoughts?
Last edited:
Yes That Bolt is a pain in the *** and is not mentioned in the instructions you have to remove it or you will tear that front cover
HockeyCowboy
Active Member
Thanks @CharlieP ...feel better to know it can come out w/o something else going wrong.
Just wanted to say your switch placement is super clean and I will probably place my switches there for my rough country grill lights. Do you have a diagram for how you wired the switch to always stay lit?
Damion
Well-Known Member
- Joined
- Jul 23, 2019
- Messages
- 227
- Reaction score
- 155
- Points
- 43
- Age
- 43
Might be a stupid question, but does the lower grill light output get diminished some by shining through the grill?
Thinking of doing this to mine, but my trucks lower grill is solid, id have to get a " mesh " one. Debating wether or not its worth doing if it doesn't give that much more light. The led headlights and fogs are amazing though.
Thinking of doing this to mine, but my trucks lower grill is solid, id have to get a " mesh " one. Debating wether or not its worth doing if it doesn't give that much more light. The led headlights and fogs are amazing though.
The switch is only lit when the lights are on. the only light that is wired not through the switch is the DRL on the hidden grill light
Yes you will need the mesh grill. if the light is diminished any it is very little
brawler1588
Well-Known Member
- Joined
- Aug 28, 2019
- Messages
- 217
- Reaction score
- 164
- Points
- 43
- Age
- 36
What do you think about cutting a slot in the solid grill big enough for the lightbar?
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
It will still be sitting back behind the grill so you will have that gap that will be seen. Maybe try it with the solid grill and if you dont like it then order the open mesh.
Rplante3108
Active Member
- Joined
- Jan 27, 2019
- Messages
- 120
- Reaction score
- 76
- Points
- 28
- Age
- 40
Rough Country has a link to the mopar grill for the light bar. It's like $34 or something. If your not really reading the description down below..you can miss it.
