Rear wheel well liner

[NorthernArea51]

Did you put the Duratrac's on yourself?

Oddly enough, those liners look like the ones on the Classic models.

I did...found a deal non rebel wheels and tires with less than 4K on them


Sent from my iPhone using Tapatalk

 

[User_3336]

I did...found a deal non rebel wheels and tires with less than 4K on them


Sent from my iPhone using Tapatalk

I have them on my Tradesman (long story at dealer's expense).....Do you find these tires somewhat loud and noisy?

 

[User_3336]

Yeah, same ones I have. You don't know about the extra screws until you read about it on here.

I bought them from Rock Auto here are the part #’s
68275910AB liner
68275911AB liner
6510175AA this is the extra hardware you need

I believe I paid just under $160 all in with shipping

 

[NorthernArea51]

I have them on my Tradesman (long story at dealer's expense).....Do you find these tires somewhat loud and noisy?

They’re definitely louder than the stock big horn tires. I feel like I got accustomed to the noise very quickly though. The ride and grip is night and day though, I won’t trade those lol. That being said, I will probably explore other options when it’s time to replace them...most likely the KO2’s.


Sent from my iPhone using Tapatalk

 

[PurpleRT]

Pay the $200 and get the liners,


Sent from my iPhone using Tapatalk Pro

 

[User_3336]

Not to derail the thread, but imagine this truck with these wheels. It ain't even the same truck!!! Black running boards go on this week, and I will have to install the wheel liners as well. The liners are a little flimsy..



This is the REBEL they came off of...

They’re definitely louder than the stock big horn tires. I feel like I got accustomed to the noise very quickly though. The ride and grip is night and day though, I won’t trade those lol. That being said, I will probably explore other options when it’s time to replace them...most likely the KO2’s.


Sent from my iPhone using Tapatalk

 

[brotherGood]

I bought them from Rock Auto here are the part #’s
68275910AB liner
68275911AB liner
6510175AA this is the extra hardware you need

I believe I paid just under $160 all in with shipping

Good looking out on the part numbers..ordered some this morning. Used the discount code and I'm at like 156 to the door.

 

[User_3336]

you need MORE THAN ONE of 6510175AA. I forgot how many they sent me

 

[brotherGood]

you need MORE THAN ONE of 6510175AA. I forgot how many they sent me

The 10 pack isn't enough then?

 

[User_3336]

Oh, sorry. 6510175AA is a 10 pack. The dealer where I ordered mine from only said I needed 6, so they sent 6 out of the 10 that was in the pack, kinda cheezy, eh?

The 10 pack isn't enough then?

you need MORE THAN ONE of 6510175AA. I forgot how many they sent me

 

[Bigga826]

Oh, sorry. 6510175AA is a 10 pack. The dealer where I ordered mine from only said I needed 6, so they sent 6 out of the 10 that was in the pack, kinda cheezy, eh?


you need MORE THAN ONE of 6510175AA. I forgot how many they sent me

Anyone know the part number of the utabs/clips?

 

[Jeff B]

Mine would've taken 6 , but I decided to use those push plugs in the 2 holes on bottom behind tire. The screws went in empty holes along fender lip

 

[antwon412]

$100 shipped for a set from rough country

 

[htownbrewer]

I installed the rear wheelhouse liners today on my 2021 Lonestar. It went pretty smoothly. I broke one of those white plastic clips, even though I was trying to be extra careful. I picked up some similar clips from autozone that seem to be fine. However, after install, I realized that you can easily remove the clips by pushing them through the hole on the backside, and then install the clips onto the trim piece first. I have a photo below of the backside of those clips.

On another note, in the video above from the Nov 1, 2018 post by GregHBNA, the part number for the extra screws is wrong. The part that others have posted (6510175AA) is correct.

Also, one of my existing screws was shorter than the rest (only happened on the passenger side) and one of the screws (on both sides) was a different size. The one that was different on both sides appears to be an M6x1x25 machine screw, and had a different clip for holding it than the others. See photos below.

 

[User_3336]

On another note, in the video above from the Nov 1, 2018 post by GregHBNA, the part number for the extra screws is wrong. The part that others have posted (6510175AA) is correct.

I posted that video (a Video from youtube) on August 30, 2020 NOT November 1, 2018 (that was my join date in the forum).
and the Part # 6510175AA is the part number that was started in other posts, and the part # of the ones the vendor shipped me.

 

[htownbrewer]

I posted that video (a Video from youtube) on August 30, 2020 **NOT** November 1, 2018 (THAT WAS MY JOIN DATE ON THE FORUM).
and the Part # 6510175AA is the part number that was started in other posts, and the part # of the ones the vendor shipped me.

Sorry, I didn't mean it to sound like I was calling you out. My bad on the getting the date wrong. I was just trying to reference the video, not your post. I wanted to let people know that in that video, the guy gives the wrong part number for the screws. Otherwise, the video was really helpful.

 

[User_3336]

Sorry, I didn't mean it to sound like I was calling you out. My bad on the getting the date wrong. I was just trying to reference the video, not your post. I wanted to let people know that in that video, the guy gives the wrong part number for the screws. Otherwise, the video was really helpful.

No problem! I just posted the video for reference from YouTube. It was informational.
When I ordered mine, I just told the seller that I needed the additional screws and they needed to be included, and they sent 6.

 

[Natty Joe]

Paid like $90 shipped from rough country. Crazy that we need to buy wheel liners on a 50k truck but here we are

 

[NorthernArea51]

I didn’t. And looking back I feel like it’s something I didn’t even consider looking at when I walked around the truck. But...yeah, it’s nuts it’s not standard for looks alone.


Sent from my iPhone using Tapatalk

 

[User_3336]

Paid like $90 shipped from rough country. Crazy that we need to buy wheel liners on a 50k truck but here we are

$90 EACH or $90 for the PAIR?