5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Rear Spacer Lift 1/2"

Hadit55

Active Member
Joined
Apr 30, 2023
Messages
96
Reaction score
12
Points
8
Location
Michigan
Does anyone know if the below would work with a 2020 4WD Big Horn? Looking at the 1/2" rear spacer. It says they work up to a 2018 RAM.

 
Hmm, I mean they look like they would fit but I’m not sure.
If you want something that I know works because I’m running it on my truck it’s these even though they’re 3/4” not 1/2”:
Great feedback. Thank you!

Also just to confirm, you have a standard suspension, correct?
 
Hmm, I mean they look like they would fit but I’m not sure.
If you want something that I know works because I’m running it on my truck it’s these even though they’re 3/4” not 1/2”:
Did you get a true .75, or slightly less or more? I see they are polyurethane so I would think they would compress a bit.
 
I actually got a true 3/4” and I have a long bed too so fairly heavy
 
Hmm, I mean they look like they would fit but I’m not sure.
If you want something that I know works because I’m running it on my truck it’s these even though they’re 3/4” not 1/2”:
I have those also. I slightly milled the center for the entire spacer to sit flat on the lower spring perch. I’m not sure that that was necessary for me to do though.
 
I have those also. I slightly milled the center for the entire spacer to sit flat on the lower spring perch. I’m not sure that that was necessary for me to do though.
Hmm I installed mine very sketchy with some ratchet straps on the coils so I didn’t have a chance to check that 😂 but I can tell you for sure with the weight of the truck on them they sit flat now 😂
 

Users who are viewing this thread

Back
Top