Rear Spacer Lift 1/2"

[Hadit55]

Does anyone know if the below would work with a 2020 4WD Big Horn? Looking at the 1/2" rear spacer. It says they work up to a 2018 RAM.

1/2" up to 3" Rear Coil Spring Spacer Lift Set for Passenger Cars, Trucks & SUV's

Adjust your ride height with these universal rear coil spring spacers. Simple installation of the 1/2" to 3" lift for passenger cars, trucks, and SUVs.

mcbayperformance.com

 

[SKT Customs]

Hmm, I mean they look like they would fit but I’m not sure.
If you want something that I know works because I’m running it on my truck it’s these even though they’re 3/4” not 1/2”:

https://www.4wheelparts.com/p/2020-Jeep-Gladiator-DaystarDaystar-3/4%22-Rear-Coil-Spring-Spacers-KJ09192BK/_/R-BKCG-KJ09192BK?ppcfon=1&gp=1&ecmp=s:google_18700491286___&utm_source=google&utm_medium=cpc&utm_campaign=SC%20Shopping%20-%20Medium%20&%20Margin%25

 

[Hadit55]

Hmm, I mean they look like they would fit but I’m not sure.
If you want something that I know works because I’m running it on my truck it’s these even though they’re 3/4” not 1/2”:

https://www.4wheelparts.com/p/2020-Jeep-Gladiator-DaystarDaystar-3/4%22-Rear-Coil-Spring-Spacers-KJ09192BK/_/R-BKCG-KJ09192BK?ppcfon=1&gp=1&ecmp=s:google_18700491286___&utm_source=google&utm_medium=cpc&utm_campaign=SC%20Shopping%20-%20Medium%20&%20Margin%25

Great feedback. Thank you!

Also just to confirm, you have a standard suspension, correct?

 

[Hadit55]

Hmm, I mean they look like they would fit but I’m not sure.
If you want something that I know works because I’m running it on my truck it’s these even though they’re 3/4” not 1/2”:

https://www.4wheelparts.com/p/2020-Jeep-Gladiator-DaystarDaystar-3/4%22-Rear-Coil-Spring-Spacers-KJ09192BK/_/R-BKCG-KJ09192BK?ppcfon=1&gp=1&ecmp=s:google_18700491286___&utm_source=google&utm_medium=cpc&utm_campaign=SC%20Shopping%20-%20Medium%20&%20Margin%25

Did you get a true .75, or slightly less or more? I see they are polyurethane so I would think they would compress a bit.

 

[SKT Customs]

I actually got a true 3/4” and I have a long bed too so fairly heavy

 

[djevox]

Hmm, I mean they look like they would fit but I’m not sure.
If you want something that I know works because I’m running it on my truck it’s these even though they’re 3/4” not 1/2”:

https://www.4wheelparts.com/p/2020-Jeep-Gladiator-DaystarDaystar-3/4%22-Rear-Coil-Spring-Spacers-KJ09192BK/_/R-BKCG-KJ09192BK?ppcfon=1&gp=1&ecmp=s:google_18700491286___&utm_source=google&utm_medium=cpc&utm_campaign=SC%20Shopping%20-%20Medium%20&%20Margin%25

I have those also. I slightly milled the center for the entire spacer to sit flat on the lower spring perch. I’m not sure that that was necessary for me to do though.

 

[SKT Customs]

I have those also. I slightly milled the center for the entire spacer to sit flat on the lower spring perch. I’m not sure that that was necessary for me to do though.

Hmm I installed mine very sketchy with some ratchet straps on the coils so I didn’t have a chance to check that but I can tell you for sure with the weight of the truck on them they sit flat now