5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

Readylift 3.5" Kit w/ 35x12.50x18.

ErnestRocks19

Active Member
Joined
Nov 20, 2018
Messages
115
Reaction score
64
Has anybody done this setup yet? If you have I'd love to see some pics as 4wheelparts is saying they can do but all the lift kits are calling for 20" wheels. It comes with 18" stock on the bighorn just wondering what rubbing or cutting needs to be done if any.
 

DonsRam19

Ram Guru
Joined
Dec 7, 2018
Messages
618
Reaction score
404
Location
South Carolina
Has anybody done this setup yet? If you have I'd love to see some pics as 4wheelparts is saying they can do but all the lift kits are calling for 20" wheels. It comes with 18" stock on the bighorn just wondering what rubbing or cutting needs to be done if any.
I did a 2.5" Moto fab leveling kit with 35/11.50/r20 and had absolutely no rubbing.
 

Reaper_6A

Active Member
Joined
Jun 5, 2019
Messages
39
Reaction score
25
I just purchased the Ready Lift 3.5" SST kit for my 2019 Ram 1500 Laramie 4x4 and got some Ridge Grappler 35x12.5x20's that are going on my stock 20x9 wheels. Getting it installed in a week and will post some pics.
 

JBeckman

Well-Known Member
Joined
Oct 5, 2018
Messages
251
Reaction score
212
Location
Michigan City, In
Getting mine installed next week so I’ll let you know. Ready Lift says it will fit, store says it will rub. I guess only time will tell.

I just had some ko2 put on yesterday. Had slight rub on full lock reverse. Both directions. Keep in mind I had 1.5" wheel spacers installed also. I just went out to remove them and no rub. Any direction, full lock. So it will definitely work.
 

Helmetface

Active Member
Joined
Jun 19, 2019
Messages
198
Reaction score
209
I just had some ko2 put on yesterday. Had slight rub on full lock reverse. Both directions. Keep in mind I had 1.5" wheel spacers installed also. I just went out to remove them and no rub. Any direction, full lock. So it will definitely work.
Well, what offset?
 

Sal1500

New Member
Joined
Jul 11, 2019
Messages
1
Reaction score
1
Location
AZ
I've got the 3.5" SST kit and some Pro Comp A/T 35x12.50x18 being installed next week
would love to see some pics , i go back and forth with either going 20X10 or 18X9 . i like the 18x9 just becouse i would like to have more sidewall,
 
Last edited:

Reaper_6A

Active Member
Joined
Jun 5, 2019
Messages
39
Reaction score
25
Well, what offset?

I would like to know the offset as well. I have 20x9 with I believe a +18 or 19. Like I said, Ready lift says 35x12.5x20 will fit with no problems so I am hoping they are right.
 

Hym8nce

Active Member
Joined
Jan 12, 2019
Messages
60
Reaction score
42
I just purchased the Ready Lift 3.5" SST kit for my 2019 Ram 1500 Laramie 4x4 and got some Ridge Grappler 35x12.5x20's that are going on my stock 20x9 wheels. Getting it installed in a week and will post some pics.
Pics yet?
 

Reaper_6A

Active Member
Joined
Jun 5, 2019
Messages
39
Reaction score
25
Pics yet?

Picked it up today. So far, no issues. I've got about 1/2" to 3/4" of clearance by the upper control arm. It is really close on the inner fender at full lock so a little minor trimming may be necessary but I have only drive it about 30 miles and it feels great.


image1.jpeg image2.jpeg image3.jpeg image4.jpeg image5.jpeg image6.jpeg
 

Echance01

Active Member
Joined
Jul 18, 2018
Messages
78
Reaction score
44
Location
Phoenix, AZ
Picked it up today. So far, no issues. I've got about 1/2" to 3/4" of clearance by the upper control arm. It is really close on the inner fender at full lock so a little minor trimming may be necessary but I have only drive it about 30 miles and it feels great.


View attachment 33372 View attachment 33373 View attachment 33374 View attachment 33375 View attachment 33376 View attachment 33377

Has anyone measured how high their truck is with this set up? Wondering if I will still be able to park in my garage at home and in the parking garage at work.
 

Hockeygod1225

Active Member
Joined
May 1, 2019
Messages
126
Reaction score
74
Not trying to high jack this thread but I just had the same lift put on. What size tire do you think would do best on the oem laramie 20" wheels?
 

Reaper_6A

Active Member
Joined
Jun 5, 2019
Messages
39
Reaction score
25
Not trying to high jack this thread but I just had the same lift put on. What size tire do you think would do best on the oem laramie 20" wheels?

The Nitto Ridge Grapplers 35x12.5x20 work fine on my truck. So far no issues
 

Reaper_6A

Active Member
Joined
Jun 5, 2019
Messages
39
Reaction score
25
Has anyone measured how high their truck is with this set up? Wondering if I will still be able to park in my garage at home and in the parking garage at work.

6’9” (81”) to the top of the antenna.
 

1776

Active Member
Joined
Apr 7, 2019
Messages
32
Reaction score
12
Location
Fort Worth, TX
I did a 2.5" Moto fab leveling kit with 35/11.50/r20 and had absolutely no rubbing.

Don I'm doing a similar setup. How are your 3.21 gears handling the 35's? Also any noticeable improvement with the Hellwig? Thanks!
 

Users who are viewing this thread

Top