Ram Box

[Deleted member103]

Actually not 100% true. I did my homework because I considered ordering a truck without Ramboxes and reusing my cover.

Here is the info I got from the Tonneau Vendor:

Description	Finished Cover Code	Measurement between rails*	Rail Length	Cover length: back of Ft. Ch to end of TG	Can Width + spirals not at mount holes	Bed Length	Cab Width	TG Width
D-5.7-09	231	57.995	66.750	60.563	61.375	65.250	62.000	62.000
D-5.7-19	243	57.120	67.125	60.938	60.500	65.375	61.750	61.750

Above are the details and dims of the 2 covers.

The rails on the new 19 are 5/8 inch longer and the canister is 7/16 inch narrow on the 19 model. The 10231 cover may fit in the bed (may be a little tight to get canister in 19 model) it may not seal as well as one that is meant to fit the truck.

Finally something I can "digest" - nice detecting 'cj' ! Now if we could just "up the anti" on the "questions" on this particular segment .

 

[76rich]

I had a Retrax on my 2012 and then I put it on my 2015. I did a bit of measuring on the 2019 and I think it will fit. My cover still looks new after six years and two trucks and I just don't think I would get much for it if I left it on the 2015 truck. Retrax are too expensive to just give one away. But, I still believe they are the best ones out there. It is hard to tell, but looking at the new trucks, the plastic covers on the top of the fenders look thicker and that may be the fine difference in the measurements.

 

[2019REBEL]

Actually not 100% true. I did my homework because I considered ordering a truck without Ramboxes and reusing my cover.

Here is the info I got from the Tonneau Vendor:

Description	Finished Cover Code	Measurement between rails*	Rail Length	Cover length: back of Ft. Ch to end of TG	Can Width + spirals not at mount holes	Bed Length	Cab Width	TG Width
D-5.7-09	231	57.995	66.750	60.563	61.375	65.250	62.000	62.000
D-5.7-19	243	57.120	67.125	60.938	60.500	65.375	61.750	61.750

Above are the details and dims of the 2 covers.

The rails on the new 19 are 5/8 inch longer and the canister is 7/16 inch narrow on the 19 model. The 10231 cover may fit in the bed (may be a little tight to get canister in 19 model) it may not seal as well as one that is meant to fit the truck.

The canister ones are a little different. I was just thinking of the normal ones that lay on the cargo management system like my BakFlip does. I have never had one with a canister so not sure on those ones.