kiesey
Member
- Joined
- Jun 15, 2020
- Messages
- 18
- Reaction score
- 13
Spent a couple weeks up north, found some nice roads to play on. The driveway was pretty fun too! Love the f out of this truck...2000km and I’m already rippin it, enjoy!
Hey man, sorry for the late response. Yes, there was some minor trimming and we had to remove the factory "mud flap."Did you have to do any trimming to get those tires to fit?
Hey man, sorry for the late response. Unfortunately, I didn't measure the stock height. But, I just measured from the ground to the top inside of the fender and it was 46" on the back and about 45.75" on the front. Hope this helps!How much height did you get over stock with the lift? I have a level right now, but am considering going higher
Sent from my Pixel 3 using Tapatalk
Hey man, sorry for the late response. We did have to trim some of the the fender well lining and remove the factory "mud flaps." But There hasn't been any rubbing since we did that. Hope this helps!do you get any rubbing with the 37s? And was there a lot of trimming required?
No worries, that's really helpful. I just measured my back at 39" (stock Rebel with 33s). Factoring in your tires at two inches of height it looks like you netted 5" of lift over stock.Hey man, sorry for the late response. Unfortunately, I didn't measure the stock height. But, I just measured from the ground to the top inside of the fender and it was 46" on the back and about 45.75" on the front. Hope this helps!
Well its not pretty, but it works to get the bed rack and tent (250lbs) onto the truck by myself, and comes together nicely with the Decked
system.
Well its not pretty, but it works to get the bed rack and tent (250lbs) onto the truck by myself, and comes together nicely with the Decked
system.
Love these wheels. I was between these and the fuel shoks that I have. Good looking truckBeen meaning to post this. 18x9 Fuel Vectors.
PHFT -Well its not pretty, but it works to get the bed rack and tent (250lbs) onto the truck by myself, and comes together nicely with the Decked
system.
View attachment 65907 View attachment 65908 View attachment 65909 View attachment 65910
PHFT -
just curious why you didn’t just get a cap and out the roof tent on top? All the gladiators and pickups I see are going with a rack in the back instead of a cap which can easily hold a tent and people. Those racks are pricey and your gear would be more protected and secure
just curious - looks sharp and you should post some trip reports
Maddog:
Firet let me compliment your handle
Thank you for the well thought out answer. Very comprehensive. I’m in the same boat. Expensive bikes and gear but I’m in my 40s now and while I don’t mind just putting the seats up in the second row and catching sleep there, my honey and my daughter require some comfort if I ever want them to speak to me again
I’m considering the same options and yeah the caps are surprisingly expensive especially if you want any goodies
I’m still ambivalent but good to hear your thoughts
thanks!
PHFT -
just curious why you didn’t just get a cap and out the roof tent on top? All the gladiators and pickups I see are going with a rack in the back instead of a cap which can easily hold a tent and people. Those racks are pricey and your gear would be more protected and secure
just curious - looks sharp and you should post some trip reports
Good idea! I would put some cross bracing on it though. With the weight in the air, it wouldn't take much to get it out of square then on the ground.
Super cool setup! I have a VERY similar setup on my 2020 (Not a rebel so not posting it in this thread and getting harassed haha) but check out my build thread in my sig.. I have the Tuff Stuff Alpha hard shell roof top tent and the Leitner Designs rack.. I opted to just leave it all on full time because taking it off and storing it seems like a nightmare.. my rack is also much more than 4 bolts.. Either way, good looking rig! Love seeing other Ram Overland trucks!Well its not pretty, but it works to get the bed rack and tent (250lbs) onto the truck by myself, and comes together nicely with the Decked
system.
View attachment 65907 View attachment 65908 View attachment 65909 View attachment 65910
No blockage of signal! my satellite radio works great. This is the first production camper for the full-size trucks. they have gone through several prototypes. and of course, still working on improving things, so the people who get in on the "launch" will be taken care of down the road when / if things improve.I saw your truck on Super Pacific’s IG. Since you’re the guinea pig I’d love to hear your thoughts. One of my biggest concerns for these types of campers is the antenna. Is there enough clearance and can you still get satellite reception?