5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Post your Rebel pics!
- Thread starter dannydyn
- Start date
dannydyn
Well-Known Member
looks awesome man, is that Maximum Steel or Granite Crystal? Kind of hard to tell.
1BADRAMLIMITED
Ram Guru
GCM
H2OMAN
Ram Guru
Granite Crystal.
dannydyn
Well-Known Member
Bada55!
Fastxn
Member
CaliRebel
Active Member
Jake103
Active Member
Love the delmonico red on the rebel. Sharp looking truck!
JRD
Well-Known Member
- Joined
- Sep 29, 2018
- Messages
- 353
- Reaction score
- 218
- Points
- 43
i was actually just looking at this exact setup. A few questions if you dont mind..Got some new Bilstein 6112's installed along with Method MR305's wrapped in BFG KO2 35x12.5R18
The methods are 18x9 -12 offset
I love the way she sits now
1. did you have to do any trimming? i have a laramie so i think your rebel sits an inch or two higher than mine
2. with the -12 offset, do you have any poke?
3. do you run any wheel spacers?
4. how much space do you have between the UCA, again i believe you have different UCAs than i do.
Sorry to be a pain, but i was supposed to get TRX takeoffs and did a bunch of research on the fitment and it fell through so i'm starting from scratch
CaliRebel
Active Member
No worries man, I love talking about my truck so here you go:
1. I didn't exactly have to do any "trimming". I did have to remove the plastic mudflaps in the front. No rubbing after that.
2. There is a slight amount of poke with a -12 offset. (The perfect amount in my opinion)
3. Im not running wheel spacers. They’re not needed since the wheels already have the -12 offset.
4. I’m running factory UCA’s. There is plenty of space, again because of the -12 offset.
If you’re planning on running TRX takeoffs, you will have to run spacers due to the positive offset on those wheels. There are a few guys on here that posted their builds with TRX takeoffs and they show the tires rub on the UCA’s before adding spacers.
Last edited:
L Curtis
Active Member
CaptainCJ35
Ram Guru
- Joined
- Aug 7, 2019
- Messages
- 534
- Reaction score
- 437
- Points
- 63
- Age
- 54
What size Falken's are those? That set up just looks soo right!
boogielander
Spends too much time on here
- Joined
- Jun 29, 2022
- Messages
- 2,483
- Reaction score
- 4,247
- Points
- 113
some pictures since my last time posting in this thread:
Drove over the waterfall
Touched Colorado River in Grand Canyon
Went camping in the meadows
taught my truck to wheel itself.
Went camping in the forest. Leveling blocks are such life savers.
The rock was too big for the truck to do it itself so I had to hop in and takeover.
It doesn't look like much but i was sitting on my slider there. That was the best line because right behind the front passenger tire there was a drop.
Drove through the meadow in AZ
Drove over an old metal bridge
Camped in the rain.
Drove over the waterfall
Touched Colorado River in Grand Canyon
Went camping in the meadows
taught my truck to wheel itself.
Went camping in the forest. Leveling blocks are such life savers.
The rock was too big for the truck to do it itself so I had to hop in and takeover.
It doesn't look like much but i was sitting on my slider there. That was the best line because right behind the front passenger tire there was a drop.
Drove through the meadow in AZ
Drove over an old metal bridge
Camped in the rain.
