What's new
By:
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Post your pics of 37s and give some feedback!

Chris VB said:
That’s mint, I wanted a BDS but my shop deals with pro comp and fabtech here in Ontario. Procomp holds a good warranty, all the dealerships here use procomp. I just liked that BDS replaces the coil spring with a new longer one opposed to compressing the stock ones. I also wanted coil overs lol, but I had to draw the line on the total build. They look and perform great I’m sure.


Sent from my iPhone using Tapatalk
Click to expand...
Thanks! Ive been wanting coil overs since my jeep days so I decided to go for it and im very happy I did. The ride is great and I love the capability.
Procomp is a good company and has been around forever. My buddy has an 02 1500 with a 6" procomp lift and has never had any issues with it and hes going on 15+ years with it and over 100k miles.
 
FuriousDZ said:
Thanks! Ive been wanting coil overs since my jeep days so I decided to go for it and im very happy I did. The ride is great and I love the capability.
Procomp is a good company and has been around forever. My buddy has an 02 1500 with a 6" procomp lift and has never had any issues with it and hes going on 15+ years with it and over 100k miles.
Click to expand...

Nice brother! That makes me feel better about the lift :)


Sent from my iPhone using Tapatalk
 
20210325_104634.jpg

11 mpg city 14 hwy with 3.92 gears, 5+1 lift on air suspension, 22" fuel blitz and 37" ridge grapplers. Rides OK, compared to some other cheaper cars. But no where near as smooth as it was stock.
 
This thread is the devil! I’m a ways away from lifting and it’s killing me.
 
Jabberjaw said:
This thread is the devil! I’m a ways away from lifting and it’s killing me.
Click to expand...

Lol I so glad I did!! I love my truck!
Wouldn’t change a thing
270fbaf775d952d2a00166186cf43c60.jpg



Sent from my iPhone using Tapatalk
 
FishOn said:
Between the Pulsar in Performance mode and the 37's, MPG is averaging 12... But I'm told I drive with a heavy foot. When I'm dropping $9 or 10k on lifts/wheels/and 37's, MPG isn't really part of the equation for me anymore. Still rubs when you have the wheel cranked and I'm on it and bouncing around in the dirt. IMO I don't think you're going to get 37's under a 4" without some heartache. Between the coil overs and the Hellwig, I hit the same turns at the same speeds as when it was stock and it doesn't feel "tippy" at all. Hands down, the smoothest lifted truck I've ever ridden in. The thing is STUCK to the ground.

View attachment 78121
Click to expand...
I’m on 35s with a leveling kit. I think a 4in lift would for sure clear 37s.
 
D52670 said:
I’m on 35s with a leveling kit. I think a 4in lift would for sure clear 37s.
Click to expand...

If you got pizza cutters lol
I need 8” lift to fully clear(barely) 37”x13.5” on 24x12 -44 OS. You’d need less offset and skinnier wheel/tire ;)


Sent from my iPhone using Tapatalk
 
Chris VB said:
If you got pizza cutters lol
I need 8” lift to fully clear(barely) 37”x13.5” on 24x12 -44 OS. You’d need less offset and skinnier wheel/tire ;)


Sent from my iPhone using Tapatalk
Click to expand...
You might clear them going down the road Straight ahead until you turn the wheel lol. 6in bds here with 35s on a 20x10 and I have a little rub on the back of the fender at full crank in reverse.
 

Attachments

  • 4F2AEFCE-3BDE-452D-85D7-F896044A773E.jpeg
    4F2AEFCE-3BDE-452D-85D7-F896044A773E.jpeg
    150.7 KB · Views: 107
D52670 said:
I’m on 35s with a leveling kit. I think a 4in lift would for sure clear 37s.
Click to expand...
Unless you go with a 9” wide wheel with a 0 offset or something and 37s that run small I don’t think you’ll get it to work unless you cut the cab and bumper. I’m at 6.5” of lift now and I’d say mayybe 5.5” would be the minimum and you’d have to completely cut the pinch weld off.
 
I have air suspension with 5" RC lift + 1 inch lift via adjustable air links and I still couldn't fully clear my 37x12.5" tires. I had to trim the wheel wells and cut part of the pinch weld. I still rub a little bit in Aero mode.
 
Chris VB said:
Hey guys. I could care less of gas mileage lol I love the look!
37x13.5 on 24x12 -44 with 8” lift. Recalibrated, searching for 8th gear a bit on the Hwy but not that bad. I have zero rubbing issues even at full turn.
View attachment 82722
View attachment 82723
View attachment 82724


Sent from my iPhone using Tapatalk
Click to expand...
Hey man you have 3.21 gears right? I’m curious what rpm you’re at going 75mph? On my truck with 3.92s I’m at 1950rpms at 75 with the 3.92 gears. Thanks
 
Mclovinnnnn said:
Hey man you have 3.21 gears right? I’m curious what rpm you’re at going 75mph? On my truck with 3.92s I’m at 1950rpms at 75 with the 3.92 gears. Thanks
Click to expand...

Hey, yes 3.21. I’ll have to check when I take it out. 1950 seems high to me on from what I remember but I’ll get back to you my friend. She’s not a daily driver so whenever I’m in it I pay attention to its cleanliness


Sent from my iPhone using Tapatalk
 
Mclovinnnnn said:
Hey man you have 3.21 gears right? I’m curious what rpm you’re at going 75mph? On my truck with 3.92s I’m at 1950rpms at 75 with the 3.92 gears. Thanks
Click to expand...

Hey I found this picture! I was doing 110km (68.5mph) in 8th sitting @ around 1400 rpm. I remember taking this when this question arose last time lol
But I’ll still check @ 75 and snap a pic for ya if this doesn’t help lol
fd15b5d53274f28b6f8fe8b4a8732a7b.jpg



Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Site Vendors

https://www.jasonlewisautomotive.com/

Members online

Total: 728 (members: 4, guests: 724)
Back
Top