My Maxtrac lowering installation

[ferraiolo1]

Maxtrac is having a Black Friday deal. My tires are starting to show some inner wear. So I grabbed the UCAs and will lower the front another .5in


Sent from my iPhone using Tapatalk

 

[Dschmid37]

Yes

I have recently removed the spring spacers, and it sits perfectly level. I do have the 5.7 hemi with e torque. The spacers are NOT required.

 

[Dschmid37]

On a side note... I just purchased the Bilstein 24-185684 for my truck. They are about 2" shorter than the Maxtrac shocks! I had to put them on anyway because I cut the Maxtrac's off and only have one vehicle. My truck doesn't go offroading so I'm hoping the shocks don't get overextended.
Yes, the ride greatly improves with the Bilstein shocks.