5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Looking to install aftermarket subs

set it up how you like it to sound. i do suggest you keep the subs at 80htz and set the head unit flat on bass or negative if you don't have a amp on them, if you do i normally do 100 or 110 on the highs with 12 db crossover slopes your not missing anything, the spikes are 500 rms = 1000 for the set you do have box rise but watch the clipping. for the air space in the box you really only had 2 choices the spikes and sundowns i have tried a few sets and the spikes worked out the best for sq jlw3's would be next but they are too much $$$$$ jl is proud of those.
i have a dsp so changing the slope, levels and cross points is on my app and done in a instant and from the drivers set
 
Hello all. New to this forum and need help. I’m looking to install 2 10” subs and an amp in my 22 ram 1500 big horn. Does anyone know where I can buy a sub box for the big horn quad cab? Seems like most boxes are intended for the crew cab and the quad cab boxes I’ve come across are not compatible for the 2022
 

Attachments

  • 20240603_122455.jpg
    20240603_122455.jpg
    203.9 KB · Views: 4
  • 20240531_204051.jpg
    20240531_204051.jpg
    196.7 KB · Views: 4
  • 62087aee-962b-404d-aed7-26a4697e4187.jpg
    62087aee-962b-404d-aed7-26a4697e4187.jpg
    153.9 KB · Views: 4
  • IMG_20240531_184633.jpg
    IMG_20240531_184633.jpg
    143 KB · Views: 4
JL Audio sealed box, 2x shallow subs. If u have grey interior, the 2x 12's may fit! U dont need 1000 watts.. 750 plenty, i went overkill. Ran hot wore through groment and sealed up with black RVT sealant, easy. Used breaker from Amazon, 80w I think. Ground was easy, huge lugs for the E Torque battery behind rear seat on drove side
NET AUDIO for line level converter! Not 1 wire was cut on truck! Clean!
 
JL Audio sealed box, 2x shallow subs. If u have grey interior, the 2x 12's may fit! U dont need 1000 watts.. 750 plenty, i went overkill. Ran hot wore through groment and sealed up with black RVT sealant, easy. Used breaker from Amazon, 80w I think. Ground was easy, huge lugs for the E Torque battery behind rear seat on drove side
NET AUDIO for line level converter! Not 1 wire was cut on truck! Clean!
if you look back on this thread i installed 3 amps 2-10's all new door speakers and dash speakers, DSP and i also did not cut 1 wire. i could go back stock in about 2 hours maybe less. i know because i removed it from my bighorn Q cab and moved everything to my laramie crew. i did cut the back carpet under the window.
 

Users who are viewing this thread

Back
Top