Is it possible to add Blind Spot?

[Mitch_308]

Thanks for at least coming back to the thread and posting the fix. Will definitely help others. . Are you getting audible alerts when attempting to go into occupied lanes when trying to enter those lanes?

I feel I owe it to the community to report a solution to a problem instead of complain lol.

I did not test that part yet, wasn’t many people on the road when I was out and I was just making sure the distance and when the light turned on lined up. I’ll reply back once I get in that situation.

 

[Mitch_308]

Thanks for at least coming back to the thread and posting the fix. Will definitely help others. . Are you getting audible alerts when attempting to go into occupied lanes when trying to enter those lanes?

I’m getting audible alerts using turn signals when there is a vehicle in the detection zone.

 

[Undaground]

I’m getting audible alerts using turn signals when there is a vehicle in the detection zone.

Thanks for the update Mitch. What settings in alfaobd did you use? I have the lights on Mt mirrors pop up but no sound ever and nothing displayed in my cluster.

 

[MannyN]

Thanks for the update Mitch. What settings in alfaobd did you use? I have the lights on Mt mirrors pop up but no sound ever and nothing displayed in my cluster.

Try this setting in Alfa.
• Cabin Net-LBSM Left Blind Spot Module – Enable• Cabin Net-RBSM Right Blind Spot Module – Enable• CustSetMenu 1-Blind Spot Alert CSM – Yes• Veh Config 7-Active Blind Spot Present – Yes• Car Configuration Change: Doors-Blindspot Mirror Present - Yes
Cust.Set.Menu 2 Blind Spot With Trailer CSM Present.
Cust.Set.Menu 3 Trailer Length Blind Spot Enable/Disable CSM Present.

 

[catrue]

Thank you to everyone who has posted in this thread, it was very helpful reading through to see what worked and didn't. In the end, I was able to find what I hoped was the right set-up for my truck.

Went ahead and tackled this today and it was relatively smooth, no issues and it is ready to go! For reference, here is what I used for parts and the Alfa settings.

Bought used taillight assemblies that were for parts and didn't work according to the listing. They had what I needed though, sensors and the heatsinks. I did order the internal harness for the sensors from Jimmy when I got the 360 surround and passive entry wiring. These taillights had the wiring all intact and looked good, so I'll be selling the extra harnesses.

LH - 68263397AC
RH - 68263397AD
When I did the 360 Surround, I bought new mirrors that also had the BSM glass

De-pinned terminal #8 from the LH 300AA jumper harness. Heat shrinked it and taped it up to the harness
Pinned the xy400, this was easier than I though it would be

AlfaOBD settings:

Cabin Net: BSS Blind-Spot Sensor/LBSS Left Blind-Spot Sensor (did not have the Cabin Net-LBSM Left Blind Spot Module setting)
Cabin Net-RBSM Right Blind Spot Module – Enable
CustSetMenu 1-Blind Spot Alert CSM – Yes
Car Configuration Change: Doors-Blindspot Mirror Present – Yes
Cust.Set.Menu 3: Trailer Length Blind Spot Enable/Disable CSM Present

Everything shows up on the UC5 screen and the lights go through the initial self-test. I'll have to go take a drive and test it tomorrow.

Next mod, aux switches....