NorthEdition19
Active Member
Just put the morimoto fogs in and can’t wait for night to come! I’m putting led headlights in tomorrow to complete the front lights
Headlight revolution, these things are nice and clean. I’m gonna put some night shots up soonWhere did you find them?
Sent from my iPhone using Tapatalk
Headlight revolution, these things are nice and clean. I’m gonna put some night shots up soon
Does your truck not have the highway splitter that comes down? My arms would never fit that gap, but without the splitter that would definitely be easierAll you have to do is lay on the ground and reach up to pull out the fogs. No need to disassemble anything. It takes 20 minutes start to finish that way.
@dsn112
Does your truck not have the highway splitter that comes down? My arms would never fit that gap, but without the splitter that would definitely be easier
Mine flicker slightly. Anybody else experience this? It’s only noticeable in the casted light agaisnt a wall or garage door, etc. Can’t see it looking directly at the lights themselves. Needless to say, a little disappointed in these. I specifically wanted LED modules so that they wouldn’t flicker as opposed to just installing LED bulbs in the stock housings.
I've been going back and forth with tech support via email. They are totally clueless.Mine still don't flicker in the slightest. You should tell TRS to send you another set.
@moosem I would test it out and let you know, but my truck is currently stranded at the tint shop. Had the windshield tinted and now it won't start.
We would be too if our trucks had them. Clearly this mod is for halogen trucks, not led models.Loved these on my tundra.
I was happy with the factory led fog lights though.
For Sure! But you cant go wrong with the morimoto swap !We would be too if our trucks had them. Clearly this mod is for halogen trucks, not led models.
....unless they flicker....For Sure! But you cant go wrong with the morimoto swap !