Installed morimoto fogs

[NorthEdition19]

Just put the morimoto fogs in and can’t wait for night to come! I’m putting led headlights in tomorrow to complete the front lights

 

[Ramses]

Where did you find them?


Sent from my iPhone using Tapatalk

 

[NorthEdition19]

Where did you find them?


Sent from my iPhone using Tapatalk

Headlight revolution, these things are nice and clean. I’m gonna put some night shots up soon

 

[dsn112]

Mine come tomorrow to complete my front end retro


Sent from my iPhone using Tapatalk

 

[Ramses]

Headlight revolution, these things are nice and clean. I’m gonna put some night shots up soon

Thanks! I'll check it out. Congratulations


Sent from my iPhone using Tapatalk

 

[NorthEdition19]

Here’s some night shots, not sure how I feel

 

[GWOT_made]

Just installed the Morimoto Fogs yesterday. My stock fog light was completely shattered from a rock on the highway. Installation took less than an hour with the truck sitting level in the driveway but, would've been way easier if I took the plastics off the front fender well completely. Throwing up some pictures of install in case anyone is interested in making the change to these LEDs. Personally I think they look much better.

 

[dsn112]

All you have to do is lay on the ground and reach up to pull out the fogs. No need to disassemble anything. It takes 20 minutes start to finish that way.

 

[GWOT_made]

@dsn112

All you have to do is lay on the ground and reach up to pull out the fogs. No need to disassemble anything. It takes 20 minutes start to finish that way.

Does your truck not have the highway splitter that comes down? My arms would never fit that gap, but without the splitter that would definitely be easier

 

[moosem]

Mine flicker slightly. Anybody else experience this? It’s only noticeable in the casted light agaisnt a wall or garage door, etc. Can’t see it looking directly at the lights themselves. Needless to say, a little disappointed in these. I specifically wanted LED modules so that they wouldn’t flicker as opposed to just installing LED bulbs in the stock housings.

 

[dsn112]

@dsn112

Does your truck not have the highway splitter that comes down? My arms would never fit that gap, but without the splitter that would definitely be easier

Yea it does, when you are under it you can reach around it pretty easily.

 

[dsn112]

Mine flicker slightly. Anybody else experience this? It’s only noticeable in the casted light agaisnt a wall or garage door, etc. Can’t see it looking directly at the lights themselves. Needless to say, a little disappointed in these. I specifically wanted LED modules so that they wouldn’t flicker as opposed to just installing LED bulbs in the stock housings.

Mine still don't flicker in the slightest. You should tell TRS to send you another set.

 

[moosem]

Mine still don't flicker in the slightest. You should tell TRS to send you another set.

I've been going back and forth with tech support via email. They are totally clueless.

 

[GWOT_made]

@moosem I would test it out and let you know, but my truck is currently stranded at the tint shop. Had the windshield tinted and now it won't start.

 

[dsn112]

@moosem I would test it out and let you know, but my truck is currently stranded at the tint shop. Had the windshield tinted and now it won't start.

All these tint shops are soaking electronics with their slip solution. Should start fine once it dries.

 

[Neokane]

Loved these on my tundra.
I was happy with the factory led fog lights though.

 

[dsn112]

Loved these on my tundra.
I was happy with the factory led fog lights though.

We would be too if our trucks had them. Clearly this mod is for halogen trucks, not led models.

 

[Neokane]

We would be too if our trucks had them. Clearly this mod is for halogen trucks, not led models.

For Sure! But you cant go wrong with the morimoto swap !

 

[moosem]

For Sure! But you cant go wrong with the morimoto swap !

....unless they flicker....