5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Installed morimoto fogs

NorthEdition19

Active Member
Joined
Nov 28, 2018
Messages
66
Reaction score
19
Points
8
Age
39
Location
PA
Just put the morimoto fogs in and can’t wait for night to come! I’m putting led headlights in tomorrow to complete the front lights
 

Attachments

  • 64F4E2F1-F249-44BD-81AB-7B37799A3618.jpeg
    64F4E2F1-F249-44BD-81AB-7B37799A3618.jpeg
    94.7 KB · Views: 246
  • F874B387-43D2-4162-A1B8-A53F21FBA170.jpeg
    F874B387-43D2-4162-A1B8-A53F21FBA170.jpeg
    202.6 KB · Views: 255
  • 153FC5E6-47FA-49BC-8991-6F6A6B9E8CD6.jpeg
    153FC5E6-47FA-49BC-8991-6F6A6B9E8CD6.jpeg
    114.9 KB · Views: 258
  • 4DE805BE-C23F-4CD8-8BDF-91ADF182CE66.jpeg
    4DE805BE-C23F-4CD8-8BDF-91ADF182CE66.jpeg
    167.4 KB · Views: 243
Where did you find them?


Sent from my iPhone using Tapatalk
 
Mine come tomorrow to complete my front end retro


Sent from my iPhone using Tapatalk
 
Here’s some night shots, not sure how I feel
 

Attachments

  • 1B0B8A94-FD76-4CA2-8A8B-24BB5ECF7879.jpeg
    1B0B8A94-FD76-4CA2-8A8B-24BB5ECF7879.jpeg
    97.5 KB · Views: 177
  • 8EFE0534-31B5-4125-B2EE-ABE822BAAD90.jpeg
    8EFE0534-31B5-4125-B2EE-ABE822BAAD90.jpeg
    118.8 KB · Views: 177
  • D31F3236-026E-43EF-889E-13F41EF8F631.jpeg
    D31F3236-026E-43EF-889E-13F41EF8F631.jpeg
    62 KB · Views: 174
Just installed the Morimoto Fogs yesterday. My stock fog light was completely shattered from a rock on the highway. Installation took less than an hour with the truck sitting level in the driveway but, would've been way easier if I took the plastics off the front fender well completely. Throwing up some pictures of install in case anyone is interested in making the change to these LEDs. Personally I think they look much better.
 

Attachments

  • 20190713_131520.jpg
    20190713_131520.jpg
    102.4 KB · Views: 95
  • 20190713_133514.jpg
    20190713_133514.jpg
    95.8 KB · Views: 101
  • 20190714_001628.jpg
    20190714_001628.jpg
    61.7 KB · Views: 101
All you have to do is lay on the ground and reach up to pull out the fogs. No need to disassemble anything. It takes 20 minutes start to finish that way.
 
@dsn112
All you have to do is lay on the ground and reach up to pull out the fogs. No need to disassemble anything. It takes 20 minutes start to finish that way.
Does your truck not have the highway splitter that comes down? My arms would never fit that gap, but without the splitter that would definitely be easier
 
Mine flicker slightly. Anybody else experience this? It’s only noticeable in the casted light agaisnt a wall or garage door, etc. Can’t see it looking directly at the lights themselves. Needless to say, a little disappointed in these. I specifically wanted LED modules so that they wouldn’t flicker as opposed to just installing LED bulbs in the stock housings.
 
@dsn112

Does your truck not have the highway splitter that comes down? My arms would never fit that gap, but without the splitter that would definitely be easier

Yea it does, when you are under it you can reach around it pretty easily.
 
Mine flicker slightly. Anybody else experience this? It’s only noticeable in the casted light agaisnt a wall or garage door, etc. Can’t see it looking directly at the lights themselves. Needless to say, a little disappointed in these. I specifically wanted LED modules so that they wouldn’t flicker as opposed to just installing LED bulbs in the stock housings.

Mine still don't flicker in the slightest. You should tell TRS to send you another set.
 
@moosem I would test it out and let you know, but my truck is currently stranded at the tint shop. Had the windshield tinted and now it won't start.
 
@moosem I would test it out and let you know, but my truck is currently stranded at the tint shop. Had the windshield tinted and now it won't start.

All these tint shops are soaking electronics with their slip solution. Should start fine once it dries.
 
Loved these on my tundra.
I was happy with the factory led fog lights though.
 
Loved these on my tundra.
I was happy with the factory led fog lights though.
We would be too if our trucks had them. Clearly this mod is for halogen trucks, not led models.
 

Users who are viewing this thread

Back
Top