5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

I’m still afraid of my leveling kit .

Bee7_ivan

Active Member
Joined
Dec 24, 2019
Messages
113
Reaction score
52
So you guys I have the 3.5 kit from Rough Country.
A lot of people say the preload spacer completely ruins the ride, other say it’s not as bad as you read it is.
Some people say just do a top hat spacer. The problem with that is that I don’t think they make a 3.5 inch spacer.
So now I read on Facebook that some guy used the top hat spacer (1.5inch) and instead of the preload spacer her used bilsteins (2.2 inch)

would that be safe if installed with RC upper control arms?
 

Attachments

  • 58258CAF-884C-4BD7-A4F9-32BBA2111A77.png
    58258CAF-884C-4BD7-A4F9-32BBA2111A77.png
    427.7 KB · Views: 47
  • FC9D7195-63A7-44F5-9751-64E16B387FBC.png
    FC9D7195-63A7-44F5-9751-64E16B387FBC.png
    253.3 KB · Views: 47

Users who are viewing this thread

Top