Has anyone added a trailer brake controller to a 2025 yet?

[azzx]

I added the switch to the dash. However, where the control box should be mounted under the dash is different. There is a square black plastic box mounted where the bracket for the control box should be mounted.
Sorry - did not take a picture.
Called a few dealers, but they have not installed one in 2025 yet.
also, cannot find the wires.

 

[Jimmy07]

I added the switch to the dash. However, where the control box should be mounted under the dash is different. There is a square black plastic box mounted where the bracket for the control box should be mounted.
Sorry - did not take a picture.
Called a few dealers, but they have not installed one in 2025 yet.
also, cannot find the wires.

Trailer brake module isn’t under the dash anymore, it’s on the back wall of the cab.
Here’s the connector for it, and it’s location:

 

[azzx]

wow
What is involved to get to this?
On my 2019 Laramie, I found a way to drop the seat back. I cant find anything so far on how to drop the seat back on my 25 Big Horn
Same controller?

I bought the controller from an on-line dealer that claimed it is for 2025.
looks same as the older models
Below is what I ordered

Security Measure

www.ebay.com

 

[Jimmy07]

wow
What is involved to get to this?
Same controller?

I bought the controller from an on-line dealer that claimed it is for 2025.
looks same as the older models
Below is what I ordered

Security Measure

www.ebay.com

It’s definitely not the same controller as pre-2025’s. There’s nothing in that link I can see, what is the part number on the one you bought?

Also, from what I can decipher from the schematics, part numbers and sales codes, it appears there are three different part numbers for the 2025’s- one that is just a pass through for the 7-way trailer connector lighting circuits (which you probably have), one for trailer brake function only, and one that’s serves as the trailer brake controller and TTPMS combined.

Call your dealership parts department, and give them your VIN and have them tell you what part number “trailer tow module” is installed on your truck.

 

[Jimmy07]

This is the part number I got:

GENUINE MOPAR OEM 19-25 Ram 1500 DT Integrated Trailer Brake Controller 82215278​

Yeah, that’s the kit for 2019-2024. If it works on a 2019-2024, it won’t work on a 2025.

 

[azzx]

Called the dealer, and they said 82215278AF
The parts guy said it is the same part # is the previous models

 

[azzx]

Is it the same for all 2025 trims? I have the big horn. The reason I am asking there is an option for trailer PCKG with trailer reverse control
Not sure if the dealers have much info on 2025 yet!

 

[Jimmy07]

Called the dealer, and they said 82215278AF
The parts guy said it is the same part # is the previous models

It’s not. Trust me, I’m not guessing here. The 2025’s have an entirely different canbus architecture, and almost nothing from 2019-2024 would work on a 2025.

Is it the same for all 2025 trims? I have the big horn
Not sure if the dealers have much info on 2025 yet!

Yes. The first place to start is by calling the parts department with your VIN, and ask them to look up what part number the trailer tow module is that your truck was built with. They will be able to see that.
Then need to find out which trailer tow module you would need to swap it out with for the trailer brake controller version (it looks like it would be 68569520AB).

Once that’s squared away, you would need to have the dealer flash in the XHC sales code (if it’s even available for your VIN), and run a procsi alignment.

 

[azzx]

Thanks -
will find out on Thurs. when I go to the dealer for this.
This is what the on-line Mopar parts dealer sent me -- it costed twice as the other part numbers!!

 

[azzx]

Well Jimmy, you are correct.
Went to my dealer this morning (I printed the diagram you posted above) to show them.

Bottom line, the dealer has no clue what the correct trailer brake controller part is - let alone the location.
they did validate that there are no wires for the controller under the dash and a place to mount it.

They are supposed to call RAM's mother ship and get more info.
I would appreciate any more info if you have it so I can educate the dealer!

 

[ZK840]

I’m attempting to connect my prior Curt brake controller from 2020 RAM to my new 2025 without towing package. I didn’t find any loose wiring harness beneath the dash like before, but I did find a connector behind rear seat drivers side. Is this it?

 

[azzx]

The correct controller is 82219240AA -- per ram tech support it may be released in 2 months. Yes the location has moved behind the back seat on 2025.

Good find - this maybe it! won't know until the new controller hits the dealers

Thank you

 

[johnnyf123]

I just ordered the controller from my dealership for my 2025 Ram DT Big Horn I6 Hurricane P/N 82219240AA (on backorder). This is not the same pn as the 19-24 1500s. There is a gateway mounted in the 25 where the controller goes in the older Rams. According to my parts guys all of the wiring is there for my truck so we'll see what I get when it comes in.

 

[johnnyf123]

I just picked up the kit...it comes with the switch and new data matrix...it also comes with a pinned out wiring harness...taking it to the dealership on Thursday for installation

 

[azzx]

Please provide update post instal

 

[johnnyf123]

I just picked up the kit...it comes with the switch and new data matrix...it also comes with a pinned out wiring harness...taking it to the dealership on Thursday for installation
View attachment 184939

P/N 82219240AA was the correct kit for my truck. I had the dealership install the kit ($390) as there were no instructions with the kit and I didn't want to mess with taking out the back seat to replace the controller, which they did swap out with a module that came with the truck. Brake controls and trailer set up are through the radio. The pre trip trailer light self test does not appear to be available but I haven't hooked my trailer up yet so we'll see.

 

[azzx]

Where is your dealer located?
That is a reasonable $300 less than what my dealer is quoting.
What is the data matrix they swap out?

 

[Jimmy07]

Where is your dealer located?
That is a reasonable $300 less than what my dealer is quoting.
What is the data matrix they swap out?

lol, the data matrix is the the QR scanner code on the module, but he’s actually referring to the trailer tow module on the back wall (which ended up being the part number I thought it was- 68569520AB).

 

[johnnyf123]

Thomas Dodge in Highland IN, it was $390 for installation and $300 for the kit. It did have this module installed P/N 68569521AB. They did swap it out with the brake controller that came in the kit P/N 68569520AB. The module that came with the truck was P/N 68569521AB and the controller is P/N 68569520AB. Not sure what the function was of the original module

 

[azzx]

A bit far from me!
I am curious as to why they have to swap the module that the truck came with.
Did they have to remove the rear seat?
and, pin the bundle of wires that the kit comes with?