Grill Ram emblem removal

[Skinnycarr]

Can someone tell me if it’s possible to get the “RAM” off of the grill without removing the entire grill? I can get to the clips on the back but not sure how they work?

 

[Butterfish]

Subscribed

 

[DSOOBY]

I used a box cutter to shimmy in behind the letter, then inserted a butter knife (or pry tool of your choice) and pried the letters off. they will break and pop off but your new ones will pop right in. You're going to have to be a little rough with it but it works, prying them off has been the common method here.

 

[VaderRebel]

I wonder if the 19's RAM grille letters are smaller than 4th Gen... because I hated them on my 16, but think they're fine on the 19.

 

[DSOOBY]

I wonder if the 19's RAM grille letters are smaller than 4th Gen... because I hated them on my 16, but think they're fine on the 19.

I believe they are slightly smaller.

 

[Jsvt3]

Thanks for the info! I got them wedges up with an exacto knife and pried off from there. Took all of 5 minutes to pull and replace.

 

[ponypride]

What did you replace them with? Pictures Please!

 

[Jsvt3]

Too dark for pics tonight. I did flat black RAM letters. I’ll snap a picture tomorrow morning.

 

[Jsvt3]

What did you replace them with? Pictures Please!

As promised. I also did hood emblems and all tailgate emblems in the same flat black. I forgot to order the doors so I’ll do them this weekend when they arrive.

 

[Leduke1]

As promised. I also did hood emblems and all tailgate emblems in the same flat black. I forgot to order the doors so I’ll do them this weekend when they arrive.

How did you remove the tailgate emblem?

 

[JLUR_]

How did you remove the tailgate emblem?

It's held on with double-sided tape. A hairdryer and fishing line will take it right off.

 

[Leduke1]

It's held on with double-sided tape. A hairdryer and fishing line will take it right off.

That's what I thought. Thanks!

 

[1200GS]

Thanks for the info! I got them wedges up with an exacto knife and pried off from there. Took all of 5 minutes to pull and replace.

Once you got the old one off, how do you install the new emblem?

 

[Al Czervik]

Once you got the old one off, how do you install the new emblem?

New ones have tabs that slide into slots on the face of the grill...

 

[Jsvt3]

Like Al said, they have tabs that line the emblem up perfectly and my replacement came with adhesive in place as well.

 

[nicks122293]

Can Anyone help me out with where to buy the new RAM emblem for the front grill?

 

[Al Czervik]

Can Anyone help me out with where to buy the new RAM emblem for the front grill?

2019-2020 Ram 1500 DT 3D RAM Letters ABS OEM Grille Emblem Nameplate Matte Black | eBay

2019 RAM 1500 DT Models. Unique design for 2019 Dodge RAM Models. 1 xRAM Grille Emblem. Can be used as front grille emblem. Color: matte black. Material: High quality ABS. The back of the adhesive, peel and stick.

www.ebay.com

 

[Firej6460]

As promised. I also did hood emblems and all tailgate emblems in the same flat black. I forgot to order the doors so I’ll do them this weekend when they arrive.

How’d you get the hood emblems off?

 

[Scott_65]

How’d you get the hood emblems off?

Just use a plastic pry tool on the corner and work your way around and it’ll pop right out. They’re the easiest ones to get off and l didn’t break any tabs.

 

[MikeyLikey619]

Man the A in RAM is giving me a hard time. The other two popped right off. Damnit!!