5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

AlfaOBD

Does anyone know if you can add the 360 camera view buttons on the 12" screen?
 
It should. I think you can download the demo, and view the options and not make changes. You will need either a SGM bypass, or add your own 2nd Obd port off the star connectors, to get direct access to the can-c and can-ihs bus

I know this is an old thread, I have been looking for the plug that goes into the star connector. Does anyone know something as to where to get one? Oh, by the way. I'm still trying to find someone that would like to trade sport appearance , billet silver for chrome on 2019 bighorn 3500
 

Attachments

  • 20200130_171727.jpg
    20200130_171727.jpg
    130.1 KB · Views: 216
  • 20200130_171752.jpg
    20200130_171752.jpg
    94.6 KB · Views: 214
I know this is an old thread, I have been looking for the plug that goes into the star connector. Does anyone know something as to where to get one? Oh, by the way. I'm still trying to find someone that would like to trade sport appearance , billet silver for chrome on 2019 bighorn 3500
I'd be down for the 2nd port off the star as well so I could redo my stock sgw stuff.
 
I know this is an old thread, I have been looking for the plug that goes into the star connector. Does anyone know something as to where to get one? Oh, by the way. I'm still trying to find someone that would like to trade sport appearance , billet silver for chrome on 2019 bighorn 3500
I just soldered to one of the star connector pairs.
 
Does anyone know if you can add the 360 camera view buttons on the 12" screen?
I guess I will answer my own question.
Yes you can add the 360 camera view button. I’m just not getting any help from this forum. Just saying. I have successfully added the 360 camera view button. I have done this with the Alpha OBD. Here is pictures of the setting I have changed.
Now if someone can post some pictures of the camera wires locations. Especially of the cvpm module. It’s location is behind the passenger kick panel.
 

Attachments

  • FB8AFE62-63E1-48AB-98AD-50D7D97C77CE.jpeg
    FB8AFE62-63E1-48AB-98AD-50D7D97C77CE.jpeg
    101.8 KB · Views: 401
  • 4096A172-910C-4516-85DA-AF9D1F0689B9.jpeg
    4096A172-910C-4516-85DA-AF9D1F0689B9.jpeg
    107.1 KB · Views: 398
  • D00F325F-B03C-4A4F-A60D-566E35B8E9A0.jpeg
    D00F325F-B03C-4A4F-A60D-566E35B8E9A0.jpeg
    120.3 KB · Views: 350
  • E5ADFA5B-ECDD-4179-8DA3-7BA4038F15DE.jpeg
    E5ADFA5B-ECDD-4179-8DA3-7BA4038F15DE.jpeg
    125.4 KB · Views: 357
I guess I will answer my own question.
Yes you can add the 360 camera view button. I’m just not getting any help from this forum. Just saying. I have successfully added the 360 camera view button. I have done this with the Alpha OBD. Here is pictures of the setting I have changed.
Now if someone can post some pictures of the camera wires locations. Especially of the cvpm module. It’s location is behind the passenger kick panel.
oh man, I'm sorry. I was so busy you know, living my life to look up all the information on what you want to spoon feed it to you.

all I could find is
https://www.moparpartssurplus.com/a...342/Surround-View-Camera-System/i2382261.html

I know it's not good enough and I should be able to pull this out of the ether even though FCA hasn't released a wiring diagram for the truck. I'll go throw myself into space now as punishment.

UP

UP

nope, I'm too fat. so now I fail that way too.
 
It’s just that their is a lot of people asking about the 360 camera. But no ones is really putting out any info that is helping to figure out how to restore this option. I hope I didn’t send this post directly to you. If so I’m sorry. It was not meant to be. I was posting to the group as a hole.



Sent from my iPhone using Tapatalk
 
I guess I will answer my own question.
Yes you can add the 360 camera view button. I’m just not getting any help from this forum. Just saying. I have successfully added the 360 camera view button. I have done this with the Alpha OBD. Here is pictures of the setting I have changed.
Now if someone can post some pictures of the camera wires locations. Especially of the cvpm module. It’s location is behind the passenger kick panel.
Have you looked in the body builder info for it?, just an idea.
 
Body builder info? Not sure where you mean.


Sent from my iPhone using Tapatalk
 
I believe the taser DT in one option kit comes with the bypass. if you have 2 devices you plugged in, one was to the obd2 port, and the other was the bypass that lets the taser talk to the truck for windows, lights etc.
I got ahold of zautomotive and they confirmed what you said. It is already a bypass for the security. I have confirmed it working with the trial version of Alphaobd and my BAFX scanner.
 
Body builder info? Not sure where you mean.


Sent from my iPhone using Tapatalk
Not sure you have this, my truck came with the aux switch bank, therefore I have an option in my menu that has commercial settings on it. Try this and look under "electrical"


maybe something there for you.
 
Not sure you have this, my truck came with the aux switch bank, therefore I have an option in my menu that has commercial settings on it. Try this and look under "electrical"


maybe something there for you.

Don’t see anything that I have in my truck. Thanks anyways.


Sent from my iPhone using Tapatalk
 
Does anyone know if Alfa OBD will allow Canadian trucks to use only the accent LED lights in the headlights as daytime running lights like the American trucks can do in the settings menu?
LOL i want to know how to shut them off>
 
Ya I want to know this too
I have the Alpha OBD and the Bluetooth module from my 4th Gen truck. If someone confirms you can turn the DRLs off and run only the accent lights I’ll go out and buy the bypass cable needed for our 5th Gen trucks.
 
I have the Alpha OBD and the Bluetooth module from my 4th Gen truck. If someone confirms you can turn the DRLs off and run only the accent lights I’ll go out and buy the bypass cable needed for our 5th Gen trucks.
I've got no skin in the game about what you buy, but -
DRL enable/disable is on the menu of configurable items.

Daytime running lights customer settings menu: Set
Daytime Running Lamps: Set
 

Users who are viewing this thread

Back
Top