Adding Passive Entry: How-to

[vincentw56]

Thanks @l84dnr and @vincentw56. Any thoughts on the AP5 part? The tailgate is working so it may already be enabled but I'm out of town for a few days and can't check the JSCAN programming.

What is this AP5 part? I read your post but who knows what that is.

 

[Tonkadog]

I’ve got a programming question. I’ve noticed that when the doors are already unlocked and I grab the door handle the truck wants to unlock again. Is that normal? I used JSCAN to program and everything lined up with AlfaODB instructions except I could not find this option “Cust.Prog.Features- Passive Entry Unlock All Doors or Approach Door- ENABLED” but everything otherwise seems to be working, including unlocking all the doors so I wouldn’t think that is causing what I am experiencing. I did find a post by @Jimmy07 thst talks about AP5 that I did not program. I search of the demo shows two AP5’s. AP5 trunk and AP5 Trunk Lock. @Jimmy07 (or anyone else who knows) do I set both of those to smart switch?

I used jscan the last one of the 10 is there type “cust” in search but that controls if one or all door open I believe

 

[deeve]

I used jscan the last one of the 10 is there type “cust” in search but that controls if one or all door open I believe

This thread talks about it. I’ll try to find that last one.

Adding Passive Entry: How-to

 

[rturner98]

If anybody doesn’t want to spend the money for the entire door harnesses and rear facia harness, and doesn’t feel like building the add on harnesses with the parts, let me know and I can build them for you-

How long are each cable?

 

[tristainbdts]

I elected to purchase door harness from a dealer. A issue I ran into with the driver door latch . Passenger side was fine. The driver harness had a different connector and one more wire then my factory non passive entry harness. I swapped out my old connector to the new harness and have yet to have any problems with the passive entry function or notice anything not working. my truck is a level 2 big horn and I used a door harness out of a limited I believe. part number 68429506aa and 68361206ad. side note these harness have every option (ambient lighting, door mounted tweeter, and memory seat) possibly even more. so far all I have messed with is the lighting and memory.

 

[Tonkadog]

How long are each cable?

I dont know what jimmy's are but 6'6" works for doors and 4' for tailgate works

 

[Slutzk]

Ive scrolled through multiple pages already im done lol
How much was the total cost with all the parts and pieces?

 

[vincentw56]

Ive scrolled through multiple pages already im done lol
How much was the total cost with all the parts and pieces?

You can go through the parts list in the first posts to add it up. Roughly $600 depending on what you need to buy.

 

[Slutzk]

You can go through the parts list in the first posts to add it up. Roughly $600 depending on what you need to buy.

Thank you.

 

[N7GZN]

So reading 56 pages, I come away with the following to add rear door PE.
Being a Delmonico Red Longhorn (with chrome insert) I need two handles, the same part number for both sides: 6CV361RVAD.
For the rear door handle caps I can order any side and color front door handle cap and harvest the magnet, or order two front passenger door handle caps in Delmonico Red: 6CV52NRVAB.
Order a set wire harnesses for rear door pe from jimmy07.
Then tap the respective body side harness into the front door PE wiring.

Most of the work is in the doors, everything else is already in place and enabled.
I am wondering if there are more robust methods for tapping into the factory harness that is at least water resistant. The solderless clamshell splices available at auto parts stores don't appeal to me.

 

[peteghjr]

If you are going to use the numbers below to order parts, double check them as things can change over time, so it's going to be up to you to verify you're getting the correct part when ordering. If you find a mistake please let me know so I can correct it.

5th Gen 1500 Handle and Cap Part Numbers
These should work on any of the 2019 and newer 5th gen 1500 trucks. Harnesses are going to be more specific based on your options, or you can just add the 2 wires and plugs to your existing stuff and save a good bit of money.

COLOR	BODY COLOR HANDLE, L & R	BODY COLOR/CHROME HANDLE L & R	HANDLE CAP, LEFT	HANDLE CAP, RIGHT
Bright White	6CV64GW7AD	6CV361W7AD	6CV50GW7AC	6CV52GW7AB
Ivory White	6CV64KGZAD	6CV361WDAD	6CV50JWDAC	6CV52JWDAB
Diamond Black Crystal	6CV64KXJAD	6CV361XJAD	6CV50KXJAC	6CV52KXJAB
Maximum Steel Metallic	6CV64KARAD	6CV361ARAD	6CV50KARAC	6CV52KARAB
Granite Crystal Metallic	6CV64LAUAD	6CV361AUAD	6CV50LAUAC	6CV52LAUAB
Billet Silver Metallic	6CV64JSCAD	6CV361SCAD	6CV50JSCAC	6CV52JSCAB
Patriot Blue Pearl	6CV64RPXAD	6CV361PXAD	6CV50RPXAC	6CV52RPXAB
Blue Streak Pearl	6CV64KCLAD	6CV361CLAD	6CV50KCLAC	6CV52KCLAB
Flame Red	6CV64PR4AD	6CV361R4AD	6CV50PR4AC	6CV52PR4AB
Olive Green	6CV64KFPAD	6CV361FPAD	6CV50KFPAC	6CV52KFPAB

Replacement Clips for the 1500 door panels
Door Interior Trim Panel Retainer (Yellow): 6510747AA
Door Interior Trim Panel Retainer (White): 6510359AA

HD Part Numbers
Thank you to @01Time for providing the more comprehensive list below for the HD trucks than I had originally posted.

COLOR	BODY COLOR, FRONT LEFT	BODY COLOR, FRONT RIGHT	BODY COLOR, REAR LEFT	BODY COLOR, REAR RIGHT	BODY COLOR/CHROME, FRONT LEFT	BODY COLOR/CHROME, FRONT RIGHT	BODY COLOR/CHROME, REAR LEFT	BODY COLOR/CHROME, REAR RIGHT
BILLET SILVER METALLIC	1UJ81JSCAI	1UJ86JSCAI	1GH19JSCAF	1GH18JSCAF	6NV571SCAD	6NV561SCAC	6NV591SCAC	6NV581SCAC
BLACK FOREST GREEN PEARL	1UJ81KGZAI	1UJ86KGZAI	1GH19KGZAF	1GH18KGZAF	6NV571GZAD	6NV561GZAC	6NV591GZAC	6NV581GZAC
BLUE STREAK PEARL	1UJ81KCLAI	1UJ86KCLAI	1GH19KCLAF	1GH18KCLAF	6NV571CLAD	6NV561CLAC	6NV591CLAC	6NV581CLAC
BRIGHT SILVER METALLIC	1UJ81WS2AI	1UJ86WS2AI	1GH19WS2AF	1GH18WS2AF	6NV571S2AD	6NV561S2AC	6NV591S2AC	6NV581S2AC
BRIGHT WHITE	1UJ81GW7AI	1UJ86GW7AI	1GH19GW7AF	1GH18GW7AF	6NV571W7AD	6NV561W7AC	6NV591W7AC	6NV581W7AC
BRILLIANT BLACK PEARL	1UJ81AXRAI	1UJ86AXRAI	1GH19AXRAF	1GH18AXRAF	6NV571XRAD	6NV561XRAC	6NV591XRAC	6NV581XRAC
DELMONICO RED	1UJ81NRVAI	1UJ86NRVAI	1GH19NRVAF	1GH18NRVAF	6NV571RVAD	6NV561RVAC	6NV591RVAC	6NV581RVAC
DIAMOND BLACK CRYSTAL PEARL	1UJ81KXJAI	1UJ86KXJAI	1GH19KXJAF	1GH18KXJAF	6NV571XJAD	6NV561XJAC	6NV591XJAC	6NV581XJAC
FLAME RED	1UJ81PR4AI	1UJ86PR4AI	1GH19PR4AF	1GH18PR4AF	6NV571R4AD	6NV561R4AC	6NV591R4AC	6NV581R4AC
GRANITE CRYSTAL METALLIC	1UJ81LAUAI	1UJ86LAUAI	1GH19LAUAF	1GH18LAUAF	6NV571AUAD	6NV561AUAC	6NV591AUAC	6NV581AUAC
MAXIMUM STEEL METALLIC	1UJ81KARAI	1UJ86KARAI	1GH19KARAF	1GH18KARAF	6NV571ARAD	6NV561ARAC	6NV591ARAC	6NV581ARAC
PATRIOT BLUE PEARL	1UJ81RPXAI	1UJ86RPXAI	1GH19RPXAF	1GH18RPXAF	6NV571PXAD	6NV561PXAC	6NV591PXAC	6NV581PXAC
PEARL WHITE	1UJ81PWQAI	1UJ86PWQAI	1GH19PWQAF	1GH18PWQAF	6NV571WQAD	6NV561WQAC	6NV591WQAC	6NV581WQAC
TRUE BLUE PEARL	1UJ81KBUAI	1UJ86KBUAI	1GH19KBUAF	1GH18KBUAF	6NV571BUAD	6NV561BUAC	6NV591BUAC	6NV581BUAC
WALNUT BROWN METALLIC	1UJ81RUWAI	1UJ86RUWAI	1GH19RUWAF	1GH18RUWAF	6NV571UWAD	6NV561UWAC	6NV591UWAC	6NV581UWAC
HYDRO BLUE METALLIC			1GH19MBJAF	1GH18MBJAF	6NV571BJAD	6NV561BJAC
OLIVE GREEN METALLIC			1GH19KFPAF	1GH18KFPAF	6NV571FPAD	6NV561FPAC

The following is a breakdown of the parts you will need to assemble your own 2-wire harnesses for the doors, as well as the rear antenna. All of the connectors and terminals can be found at Mouser or Digikey, except for the Yazaki stuff.

Rear Antenna Wiring Parts
22AWG wire (2 colors to make it easy)
Heat shrink tubing (recommended)
Braided wire sleeve (recommended)
Rear PE Antenna: 52112204AA or 56046957AA should work in this location
2019 & 2020 Rear Fascia Connector Terminals: TE Connectivity 1241380-1
2019 & 2020 Rear Fascia Connector Wire Seals: TE Connectivity 828904-1
2021 Rear Fascia Connector Terminals:
2021 Rear Fascia Connector Wire Seals:
2019+ Rear Antenna Connector Shell: TE Connectivity 1-1438608-5
2019+ Rear Antenna Connector Shell Terminals: TE Connectivity 1355717-1
2019+ Wire Seals for Antenna Terminals: TE Connectivity 963530-1

Door Handle Wiring Parts
18AWG wire (2 colors to make it easy)
Heat shrink tubing (recommended)
Braided wire sleeve (recommended)
Door Connector Terminals: Aptiv 10762775
Door Handle Connector Shell: Yazaki 7283-6079-30
Door Handle Connector Shell Terminals: Yazaki 7116-4720-02

Yazaki parts are hard to find without ordering minimum quantities. One option is to call SMD Inc, and see if they’ll send you free samples (2 connectors, 4 terminals).

What are the part numbers for
2021 Rear Fascia Connector Terminals:
2021 Rear Fascia Connector Wire Seals :

 

[zstroken]

Any one done just the drivers door and left the AP setting for the passenger blank? I really onle need it for the driverside, figure it would be way easier to do this. Also anyone put a meter on the door handle and measured resistance on the wires? It says smart switch, but curious if it is just a contact closure or not.

 

[vincentw56]

Any one done just the drivers door and left the AP setting for the passenger blank? I really onle need it for the driverside, figure it would be way easier to do this. Also anyone put a meter on the door handle and measured resistance on the wires? It says smart switch, but curious if it is just a contact closure or not.

Yes, I did my drivers door and then a year later did the passenger. Of course, I didn't route the wire properly and when the window was rolled down, it pulled the wire out. So, still don't have the passenger door done.

It's definitely not a simple open/close switch.

 

[zstroken]

Yes, I did my drivers door and then a year later did the passenger. Of course, I didn't route the wire properly and when the window was rolled down, it pulled the wire out. So, still don't have the passenger door done.

It's definitely not a simple open/close switch.

Did you have any issues or lack of function just doing the drivers door? Did you just change the one setting for the AP on the door you installed?

 

[vincentw56]

Did you have any issues or lack of function just doing the drivers door? Did you just change the one setting for the AP on the door you installed?

I just installed the driver's door handle and set the settings in AlfaODB. I hadn't even installed the rear antenna. Everything worked fine. Then installed the rear antenna a few days later. Everything still worked fine. Not sure what AP is, but I just followed the guide.