22” Rims on a 2019 limited with 20”

[George Bednar]

I may have found a set of new 22” limited rims. They are factory balanced and 285/45R22. Can they be mounted on the limited with out additional balancing and with out any clearance issues when turning?

 

[Goatmann]

there may be fitment issues if your limited is not the same color as the limited the rims came from.

 

[George Bednar]

Why would the color matter?

 

[warmachine]

Why would the color matter?

It doesn't. The difference between a truck that came with 20s and one that came with 22s is the 22" truck has bigger wheel bearings. The bolt pattern is still the same

 

[George Bednar]

The circumference difference is around 5/8”. Would the wheel bearing difference matter?

 

[clotagames]

The circumference difference is around 5/8”. Would the wheel bearing difference matter?

They are messing with you-22" will work just fine.

 

[Cannonball]

You didn't mention if they were the round or square 22's?

 

[warmachine]

The circumference difference is around 5/8”. Would the wheel bearing difference matter?

The wheel bearing won’t make a difference. People are routinely putting 35” mud tires on the smaller wheel bearing trucks with no issue and those are much heavier than the stock 22s. The speedometer may be off a bit but since you are sticking to the OEM 285-45-22 tires the dealer will be able to recalibrate it for you

 

[George Bednar]

Thank you Warmachine. I looked up the speedometer difference on a web site. It said +0.38 at 65mph so 65.38mph



PS Cannonball are you referring to the wheels or bearing being round or square. HA!