Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
If they used the ready lift leveling kit with upper control arms it's likely the urethane bushings where the control arm mounts to the frame. They have to be greased before install otherwise they squeak. If the upp arm is tubular and you see a red ring where it attaches to the frame that's probably your squeak.
Thank you. I’ll look into it. Anyway to lube it installed?
If they are indeed the ready lift UCA's, unfortunately no, Ready lift did not install grease zerks at these locations so removal of the UCA is required to grease them. Mine squeak every morning. Last truck had Cognitos with the same issue but they at least had grease zerks, a couple pumps every 3 months or so kept them quiet.
Thank you
. First time they greased the anti-rattle clips. That lasted for a hundred miles. 2nd time they installed an updated pads that have a larger anti-rattle clip. That lasted about 2k miles. Friday, they are replacing the calipers and pads to an updated set. We'll see how that goes. While some people may find something like this frustrating, I have to say that my dealer has been awesome. I know when I go there, they're going to try something to fix it.
Take notice if it squeaks under slight brake pedal pressure. If it doesn't, then it's the brakes.
I'll be going in this Friday for round 3 of my brake squeak saga.
Mine has the stock upper control arms but has the leveling spacers up top.
Probably not the UCA then, Maybe the way bar end links
