Breagan1029
New Member
- Joined
- Feb 5, 2022
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Age
- 36
2019 Ram 1500 Laramie - 111,000 miles
The screen has turned off and there is no power to the AC, front driver side and passenger side doors. The AC currently blows hot air from the font area at the base of the windshield. I have left the battery disconnected for roughly 14hrs to attempt to reset the truck. I have pulled the F44 radio fuse (it was not blown). I did have a message on the tac screen that said Blind Spot Sensor Not available. I removed the rear tail light where the sensor is located and unplugged it. I have orders an OEM one. I left the sensor disconnected to see if maybe it had a roll in the dash/screen issues.
Any help would be greatly appreciated.
The screen has turned off and there is no power to the AC, front driver side and passenger side doors. The AC currently blows hot air from the font area at the base of the windshield. I have left the battery disconnected for roughly 14hrs to attempt to reset the truck. I have pulled the F44 radio fuse (it was not blown). I did have a message on the tac screen that said Blind Spot Sensor Not available. I removed the rear tail light where the sensor is located and unplugged it. I have orders an OEM one. I left the sensor disconnected to see if maybe it had a roll in the dash/screen issues.
Any help would be greatly appreciated.