2.5" MOTOFAB LEVELING KIT! PICS!

[Jsig]

Was considering the 2.5 in the front and the 1in in the rear along with some bilsteins all the way around, and some lightly bigger tires

Hey Stryker, did you go with the 2.5" front and 1" rear?

 

[Stryker6040]

Hey Stryker, did you go with the 2.5" front and 1" rear?

Well that was going to be the plan, but with the new offers that Ram just came out with I am trading it in and getting a Laramie with the air suspension, take delivery on that this weekend

 

[B-Mitch]

Just did the 2.5 motofab front lift/level. The front sits 1/8" higher, so I will prob end up putting the 1" spacers in the rear. I am leaning towards the Fuel Vapor (matte black) and STT Pro 35x12.5r20s.

 

[CrazyWhiteBoy]

Just did the 2.5 motofab front lift/level. The front sits 1/8" higher, so I will prob end up putting the 1" spacers in the rear. I am leaning towards the Fuel Vapor (matte black) and STT Pro 35x12.5r20s.
View attachment 50009

Mitch, what tires did you go with? Just leveled mine and curious if 35 12.50 will fit stock wheels

 

[theblet]

I went ahead and installed the MotoFab 2.5" leveling kit on my 2019 Big Horn Sport. I had this kit on my 4th gen, everything I read said that 4th gen leveling kits will not work on the 5th Gens, but I am here to say they do. Install was the same as the 4th gen, and I didn't have to modify anything for the kit to work. As of right now, nobody makes a 2.5" leveling kit for the 5th Gens, and I didn't want to go with only a 2" from rough country because it still isn't 100% level with the rear IMO.. So I went ahead and purchased the MotoFab kit that I had on my 4th gen and gave it a try. I am very satisfied with how it turned out. The ride quality is great and still feels and drives like factory.

I ended up putting 285/60-20 BF Goodrich All Terrain KO2 Tires on my stock wheels. These tires ride soft and are quiet, just like factory. No rubbing, No trimming needed for this setup.

Here's a link to the leveling kit: https://www.amazon.com/gp/product/B00I5058AY/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Here's a link to my install video:

View attachment 3505View attachment 3506View attachment 3507View attachment 3508View attachment 3509

Nicely done! How are your UCA’s since you’ve done the 2.5” level? I don’t have ORP. My measurements from ground to wheel well are about 38” rear and 36” front. Not sure if I should do 2” or 2.5”

Thanks