lift issues

Hi all, I have an interesting issue and JBA is closed until Monday and I'm trying to get the truck back rolling... I have the Eibach Pro Truck Stage 2 and have removed my old KSP Upper Control Arms (not important, but after 10k mile both of these started ball joint sleeve leaks and the bushings...

As the title suggests I have recently installed the 3.5 inch rough country lift/level kit with the completed struts from RC. After install I could feel it almost like a gust of wind at 45mph+ sending me left and right, also following the changes of grooves in the road but not to the extent I...

Installed a mopar lift with ORP springs, and a hellwig sway bar 2 years - 15k miles ago (truck only had 700 miles on it at time of install), all was good until recently. The ESC engages (& light comes on) when going around corners over 35 mph and on a slight decline. What makes my scenario...

Hi, I’m posting this thread to see if anybody can help me. I’ve recently lifted my 2019 Ram 1500 Laramie with a BDS 2” Coilover Kit (1664F) and on the rear I added a pair of Icon 1.5” lift springs (212150). After the lift I started hearing a metal on metal clanking at the rear, sounds louder...

Have any of you guys had or know of any issues running the rough country 3.5 (with replacement struts, not spacers) on the Rebels? I know of issues with using the 1” taller factory bilstein struts in combination with the RC spacers up front, but am wondering if running the kit with the upgraded...

New here posting to the forum, but have gathered much info from it in the past month or two - it’s been a great resource for info. On to my question, for those who have or might know about the updated 2” Mopar lift (77072424AB)... can you physically see the spacers the diagram in the TSB is...

I just got my 2019 Ram 1500 back from the shop and I added the Ready Lift 3.5" x 2" lift along with BF Goodrich 35" x 12", and 20" Fuel Assault Rims. The car looks awesome, but I am having issues with the parallel and perpendicular park assist. Has anyone else had this issue? If so have you...