Search results

Body Shop can order and paint one to your color

Red is for Fire Engines

I put the Outlaw in my 2014 Bighorn and prefer the Katskin to my 2019 Larimie Got them online and found a local installer And was under 1000 for everything If you are in Colorado let me know as i have his contact information somewhere

If you are handy online products like Raptor or others available for prep and product for Around 150 I posted some pictures of mine

Which wheel liners do you have Full or the 2 I have Husky and had the 2 Installed the full and they fit pretty good

The nice thing on wired lights is they turn on when you open something. The installation is easy just takes a little time and on a difficulty scale 1.5 Easier than hanging xmas lights Use a wire splice squeeze connectors on the hot and the 2 ground wire bolts by the taillights

Split the fill 1/2 n 1/2

Mine did not come with the full liner

Has anyone done some custom work to organize their truck bed. Was thinking of a open rack inside the bed to allow for stacked storage for camping trips. Any thoughts would be great

dannydyn, you could do that with Raptor yourself for less than 100 dollars And have alot left over Look at my post with my dyi bed

With the truck turned off have you checked the drive belt on the torque? Is it lose ,burnt or has a visible defect

Here is the inexpensive spray gun for shooting the bed liner style product I shot it around 38 psi

Got it out today Cape Island 186 Fighting Lady Yellow

Had them on for long period of time to check the drain and if the system had any issues With the LED cab bedlight all is good (So Far)

I will attach the link and actually turns out mine were Amazon They are not too bright as the face slightly forward I used epoxy to attach to the factory plug As I did not want to put additional holes if the lights bit the dust The lights I got have plastic housing which I ground down to make a...

I used the one that comes in the Raptor Kits but I purchased the gun separate I will look later and see what pressure I was spraying at If you buy the gun separate you can get them with a air guage and valve SEE above In Response to this question That looks really really good. Presuming you...

Hooked the wire in for the bed lights under the rear door sill and chasing to the back was like wrestling a greased pig. Hooked in some 20 dollar EBAY lights

Did mine today and I ran the wire through the Extra hole that is under the floor cooler. Notched the tray so no bind on wire