Search results

Just got one of these with a set of used (in good shape) OEM LED headlights. Can anyone speak to the reliability? Looks like they have been out four 4 or so years now. I've seen a few guys on here with some issues that seem to be taken care of by good CS but haven't got any conformation back...

Does anyone know where I can find a used set of LED headlights (black bezel) for a 2020 Bighorn? I have the standard Halogen and the LED headlights are the last upgrade on my list to get the truck im after. Thanks in advance!

Can anyone share pictures and a link to a set of black lug nuts on a RAM, preferably one with black wheels. Appreciate it!

I like the look a lot better now after the Bilstein's on circlip #5 put me dead level (I ideally wanted .75-1" of Rake to avoid any nose high appearance). Also added Mopar Tow Hooks

Does anyone have a picture of a 5th gen RAM with a 1 inch rear spacer and Billstein’s set on level five on the front of their truck?

Hello, has anyone attempted to get a Mopar MaxCare warranty through Ziegler with a level/lift? I have Billstein 5100’s that are obviously not factory nor are they dealer installed and get the attached message when trying to sign up. I spoke to a Ziegler rep on the phone and they recommend...

I have a 2020 Bighorn and looking to add LED bulbs as a upgrade over the stock halogens. Are there any downsides to running LED bulbs in halogen housings and does anyone have any suggestions?

I have a RAM 2020 BH with Halogen headlights. If I can get my hands on OEM LED headlights, is this is an easy swap out for an experienced shop?

Does anyone know if the below would work with a 2020 4WD Big Horn? Looking at the 1/2" rear spacer. It says they work up to a 2018 RAM. https://mcbayperformance.com/passenger-car/1-2-up-to-3-rear-coil-spring-spacer-lift-set-for-passenger-cars-trucks-suvs/

Does anyone know if the below would work with a 2020 4WD Big Horn? Looking at the 1/2" rear spacer. It says they work up to a 2018 RAM. https://mcbayperformance.com/passenger-car/1-2-up-to-3-rear-coil-spring-spacer-lift-set-for-passenger-cars-trucks-suvs/

I am seeing most 34" A/T tires are well over 60 lbs which is basically 15 lbs more than factory per corner. Does anyone know of a 50-52lb A/T 34" tire?

Can I lower Billsteins from a level 5 to a level 3 months down the road? Obviously I will need to disassemble and reassemble everything again. Just making sure the struts don't carry "memory" and I will have some adverse effects.

Does anyone have any pictures of what a 1" lift looks like? Either using a Billstein level 3 or a spacer block?

Is the 1" lift in the offroad group to both the front and rear suspension? Or is it more of a level (1" in the front only)?

Has anyone used the circlip on level 3 and if so how many inches of lift did you get? Im finding the 5th level is roughly 2.3 and not 1.7 as advertised. Thanks

Does anyone know of 1/2" rear spacer for a 2020 BH 4WD?

I had a feeling this would happen based on anecdotal forum posts and it did: I have a 2020 Big Horn, stock suspension. I was torn between going with a #4 (spec'd at 1.3" of lift) and #5 level (spec'd at 1.7" of lift) on the Billstein 5100's front shocks. I wanted to keep some rake. Pre...

Im seeing the advertised height increase on the Billstein 5100’s are 1.3” and 1.7” for the #4 and #5 slots respectively. Has anyone used the #4 slot and actually achieved just over an inch or lift but also less than 1.5”?

For those of you with a 5th gen/stock (no air) suspension, Big Horn 4x4, how much front raise did you get on level 5 of the Billstein?

If I'm moving to a more aggressive tire (All season to All terrain) such as the Falkin Wildpeak, and also a bigger tire size (275/55R20 to 275/60R20) does my factory gear ratio become a concern? I have a 2020 Big Horn with a 3.21 Gear Ratio for the record. I know I will have tradeoffs on my...