Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Im running 6112 in the front of clip 8 with Mopar lifted uppers and 5100s in the back with a 1 inch moto fab spacer under the coil spring. Rear is about 5/8" higher then the front
Had the same problem on my 2022 after a update. I disconnected my phone totally from the truck and deleted Android auto on my phone. Downloaded Android auto and connected to my truck and it's been fine since then.
I've got huskys currently and wasn't happy with how they cover since I've lifted and put bigger tires on. I ordered a set of gatorback lifted mud flaps. Anyone have pictures of them on there truck? I only find pictures of the regular gatorbacks
I did Bilstein 6112 on clip 8 on my 2022 bighorn non org and Bilstein 5100 in the rear. After the 6112 we're installed the front sat about 5/16-7/16 higher then the rear. It looked horrible in my opinion. I ended up adding a 1 inch motofab spacer to the rear and it looks good now and has a tiny...
When I put bigger tires on my truck I just had the ram dealer recalibrate it along with do a alignment. Think I paid $125 for that. Comes with a two month guarantee or they do it again for free
I have a appointment to get the alignment, tires and speedo correction Tuesday. I loosened everything up and retorqued it on the ground. Only drove it once for maybe five miles. Goes down the road good and doesn't make any sort of popping noises. All that angles look good as far as ball joint...
I'm currently in the process of loosing everything up. Typically the bils I've put on before settle after some regular driving. And I still need my alignment.
So you think I should loosen everything back up on the ground and tighten it up again? I've done several Bilstein levels on my rams and friends of mine and I've never had this problem. I also have never installed 6112s.
I drove it this morning and seems to have settled some. I'm about 5/8 higher in the front still. I torqued everything down while in the air. I never loosened the lower control. Just tie rod, ucas and upper ball joints.
I bought Bilstein 6112 awhile back and ordered them preassembled on circlip 8 as my truck was 2.75 different front to rear on my 2022 ram 1500 non org. I installed them yesterday and gained nearly 3.5 inches in the front and is higher. It's looks awful. I'm not sure what to do. I could test them...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.