Search results

Thanks for the pics!! I have a whit one too so those are very helpful

Thanks! Appreciate the feedback.

Anyone swap out their halogen headlights to the Vland led’s? Is it a direct electrical swap? Any flickering? Someone said the DRL’s only work with the low beams on?

I’m puzzled. Absolutely no programming is needed from what I was told by 2 tire shops. The seller that I bought my first set from on Amazon sent me that same video when 2 didn’t read. I bought another set off eBay that recognized the sensors after a little driving. Is the sellers name...

Those look like the ones I bought. After mine were installed only 2 were showing. Drove around for about 15-20 above 25 mph and they picked up the other 2. Seems like the system checks for sensors after every 15-20 of driving.

They should work without programming. Mine kicked in after 15-20 min of non stop driving driving. Did you use the listing I used? There’s a few different ones on this post.

2 days of rain. No leaks so far.

These one’s work on the 5th gen Rams. I bought a set off Amazon before these. Gave me all kinds of problems. These ones off eBay do $69 picked up after about 10 min. No issues since...

I’m in the Pacific Northwest. Raining daily. I’ll let you know, I just did mine.

How long have you had the new gasket on? Any leaks?

Yup, took me way to scrape mine off. Used a piece of plastic I trimmed to fit and some goo gone

Do you guys take off the old gasket or leave it in place and go over it?

Home Depot

I removed the old seal. I wonder if only using the new gasket will be an issue?

I decided to change my 3rd brake light gasket before it started leaking. Is this the gasket everyone is using? Also, it feels like my 4 mounting screws bottom out when I tighten them. Anyone else experience this?

You’re able to exit the tazer menu by holding the left arrow and pressing res button? If so that’s super strange that I can’t

Zautomotive said that short cut doesn't work on the DT rams. Still waiting to hear back on what they think will work.

If I use the up down arrow it takes me out of audio menu but the tazer menu is still active on the audio screen when you go back to the audio menu screen

Anyone know how to exit the Tazer menu after making changes besides a full reboot? The hold left arrow press resume shortcut doesn't work. Zautomotive said its a bug in the new rams and suggested pressing resume or cancel button by itself to exit. Neither of those worked. Anyone have any...

Anyone have any issues backing out of the active Tazer menu? After I make any changes, I can't seem to exit by holding the "left arrow" and pressing the "res" button when the truck is not running but in the run position. That's what the instructions says to do but i cant seem to get it to work...