Search results

After considerable thought, I’m planning on pulling the trigger on the same setup (longer ORP spring for an additional 1”). If the rake is still an issue, I may swap out the rear 2” spacer for a 1.5”. When you have your spring installed, will you please post an update? I would really appreciate...

I like the Mopar lift on my Big Horn, but would like the truck a little more level. I’m interested in the ORP spring concept PLUS the 1/2” spacer for a total of 1.5” more lift in front over the Mopar 2”. I’m thinking this may stiffen the front up just a little as well which I would like, and...

Can you include a link for the Service Bulletin you are speaking of? I searched and could not locate it. Sent from my iPhone using Tapatalk

I own a 2019 4x4 Crew Cab Bighorn. I have had the 2” Mopar lift installed. I want to reduce the rake and am considering the Motofab 2” Top Spacer or the Tough Country 2” preload cool spacer. I understand the difference in installation and will see if the new UCAs that came with the Mopar 2” lift...

Maxtrac makes a 1.5” front spacer for the 2018 Ram 1500. Here is a link. https://maxtracsuspension.com/series-36-maxtrac-suspension-leveling-kit.html#!year%3D2018%7C%7Cmake%3DRAM%7C%7Cmodel%3D1500%7C%7Csubmodel%3DBIG%20HORN%2C%20V8%2C%205.7L%2C%20GAS It appears to have the same type of hole...

Just checking to see if anyone has added a front spacer to the 2” Mopar lift. If so, can you let me know your experience? Thanks. Sent from my iPhone using Tapatalk

Ha! My question begged for a smart a$$ response! Thus the “stupid question” disclaimer. I appreciate your response. I have seen discussion on other forums (relating to other vehicles) about the lift being less than the thickness of the spacer. It looks as if that is not the case with the ram...

Thanks for the input, everyone. This may seem like a stupid follow up question, but . . . Is it the thickness of the spacer or the lift it creates that has the potential to cause angles that may compromise the UCA ball joints? Sent from my iPhone using Tapatalk

I have a 5th Gen Big Horn Crew Cab with the Mopar 2” lift. I’m considering adding a top hat spacer to bring up the front. I’m thinking about the MaxTrac 1.5” Front Strut Spacer Part. No. 832515. My hope is that if I go with the 1.5” spacer, I won’t need new UCAs. And, I’m only interested in...

I have a Big Horn 4x4 Crew Cab with the Mopar 2” lift installed. I’m wondering if it’s possible to add another 1” of lift to the front, and what the risks of doing this would be? Has anyone done this? Does anyone know if there is a 1” front spacer available? I’ve seen some 1/2” stackable spacers...

Glad to hear the Helo 900s work in 18x9. That gives me hope. Does anyone run the Helo 904 in 18x9? That’s the wheel I want. I have an email into Helo, but so far no response. Sent from my iPhone using Tapatalk

Great looking rig. Stance looks perfect.

Confirmed by Ultra that the Ultra 226 Machine and 283B Gauntlet in 18x9 +12 will NOT fit.

Hey folks. There is a lot of confusion out there regarding whether certain 18” aftermarket wheels will fit in light of the larger brake calipers on the 5th Gen. Can we start a list of those 18” wheels that fit (I.e. don’t interfere with the brake calipers) along with offset, and the model of...

I am picking up my 2019 Bighorn/Lonestar Crew Cab w/ 6'4 bed next week. I currently own a 2014 Big Horn that has a Bilstein adjustable front level (2.75) with Zone UCAs, and a 1" rear lift. I love the stance of the truck and the system has worked well, though I did experience a blown ball...