My Maxtrac lowering installation

[ferraiolo1]

Maxtrac is having a Black Friday deal. My tires are starting to show some inner wear. So I grabbed the UCAs and will lower the front another .5in


Sent from my iPhone using Tapatalk

 

[Dschmid37]

Yes

I have recently removed the spring spacers, and it sits perfectly level. I do have the 5.7 hemi with e torque. The spacers are NOT required.

 

[Dschmid37]

On a side note... I just purchased the Bilstein 24-185684 for my truck. They are about 2" shorter than the Maxtrac shocks! I had to put them on anyway because I cut the Maxtrac's off and only have one vehicle. My truck doesn't go offroading so I'm hoping the shocks don't get overextended.
Yes, the ride greatly improves with the Bilstein shocks.

 

[BDub33]

Did you put on the control arms are lower it another 1/2”?

 

[Boa24]

Here are some pics with the 1.25in spacers and vossens. Still no rub with the liner tip tied back. These wheels have pretty large cutouts in them. You could get away with .75in spacers and stock studs

Sent from my iPhone using Tapatalk

You've inspired me! Im ordering this kit soon and im trying to get the wheels dialed in as well. I saw where you said you had a +20 offset. So with the spacer its essentially a 22x9.5 with around 11 offset right? The wheels im looking into are 22x9.5 with a +10 offset. I want them as flush as possible with the factory flares.